Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[AlexIDF]

Hello guys,

I used my DNS-343 with 4x1TB Samsung HDD's and all was perfect, recently i upgraded the HDD's to 4x2TB and got some issue that stuck me.

Firmware is 1.05 and models of HDD's are :

Western Digital Black -> WD2002FYPS-02w3b0

The problem i found that after NAS get filled with 1.xTB of data there is error msg that NAS doesn't have enough space but in info i clearly see almost 5TB free space, even when i format it and start from begining to fill it up again after 1.x TB i got again this msg.

Any suggestions ? tryied to rebuild array and formatted the nas.

[JavaLawyer]

Please explain what do you mean when you say you upgraded the HDDs from 1TB to 2TB.

Did you remove all four 1TB HDDs and create a new RAID-5 array with four 2TB HDDs? or did you incrementally replace each 1TB HDD with a 2TB HDD?

[AlexIDF]

I removed all previous and put new ones, and created new Raid 5 array with 4x2TB.

Upon array creation i choose EXT3. Users/Quaota FTP/Itunes etc all those are off.


p.s : Volume Name:    Volume_1
Volume Type:  RAID 5
Sync Time Remaining:  Completed
Total Hard Drive Capacity:  5900643 MB
Used Space:  195 MB
Unused Space:  5900447 MB

but when i want to move there 1.2TB data from backup, it threw me error msg not enough space.