• February 23, 2025, 12:42:03 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-600 dont Clean IPs from WIFI  (Read 4741 times)

evilgoblin

  • Level 1 Member
  • *
  • Posts: 3
DIR-600 dont Clean IPs from WIFI
« on: September 04, 2013, 10:38:40 AM »

i have installed the Router Dlink DIR-600 on a School.
we let the students connect the Cellphones and tablets on the Router but we only left 50 IPS.
When start the first break, many connect the cellphones on the ROUTER, but when finish the break, and left the "Wifi Zone" the IPS still be in the "cache" on the ROUTER.
when others Studends try to connect any device they CANT because the list is full.

I connect my computer on the network with a manual IP and try to PING any IP but i have no response.
i loggin in the ROUTER and reset him, so i have new's ip.

can u help? what i have wrong?

This is the Data in the Router:

Version: DIR-600 C1
Firmware: 3.05

Public IP: 10.0.0.53
SubNetMask: 255.255.0.0
InternetIp: 10.0.0.1

Router IP: 172.16.2.254
Statics Ip: 172.16.2.1-20
Wireless IP: 172.16.2.100-150
SubnetMask: 255.255.255.0

Wireless SETUP:
Mode: 802,11 mix (n / g / b) 20/40MHz
Channel: 11
TypePassword: WPA/WPA2-PSK
Potential: High
(i dont know how write this in English, but some like this)
InvervalKeepConnectShort: (Disable)
(i switch this from Enable to disable trying dont keep losses connections, but dont change nothing)


Now maybe i make a small BATCH who reset the router, but i hope make this temporal and resolve this mistake.

Thanks and forgive me my bad english.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-600 dont Clean IPs from WIFI
« Reply #1 on: September 04, 2013, 10:49:12 AM »

Link>Welcome!
  • What region are you located?

Try changing the DHCP Lease time (minutes) to a lower value. So how long the breaks are, set it for that time period or time frame.
http://www.support.dlink.com/emulators/dir600/101NA/lan.html
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

evilgoblin

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-600 dont Clean IPs from WIFI
« Reply #2 on: September 04, 2013, 10:54:04 AM »

From Argentina, i will and comment the changes.

Modify:
the time who has is: 10080 minutes
if i change to 60 minutes is right?
« Last Edit: September 04, 2013, 10:56:07 AM by evilgoblin »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-600 dont Clean IPs from WIFI
« Reply #3 on: September 04, 2013, 11:04:52 AM »

Yes, I believe that should work. You'll need to test it out. If the time is a bit short, then adjust for a longer duration, if it's too long then you'll need to make it shorter.

Let us know how it works for you.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.