Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[CraigfrmIL]

My Samsung TVs connect with my router but I cannot connect them to the DAP-1320.  Other devices such as laptops and tablets will connect with the DAP-1320.  I found a couple of messages from people that have the exact same problem but I don't see any solutions.  Is there a solution to this problem?

Craig 

[FurryNutz]

Link>Welcome!

• What Hardware version is your DAP? Look at sticker under DAP.
• Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
• What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Can be anything and not something that's already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.

If you temporarily disable the security on the Wifi, will the TV connect then?
If other devices are connecting to the DAP, I presume that the issue could be with the TV. You'll need to refer to the TV Mfr support site for information and help. I recommend ensuring any FW is up to date on the TV and check to see what wireless modes and security modes the TV support and test accordingly.

[FurryNutz]

Any status on this?