Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mich036]

i recently bought a new DLINK 5020L, so when trying to set it up, following the instruction on the installation CD, my WiFi wasn't able to detect the camera so i retried the procedure several times, made sure my password is correct and other devices were easily connected to Wi Fi without any problem. distance, password, everything was fine but the Edimax router still couldn't detect the camera...

I have another DLINK 5020L which was connecting normally to the same WiFi, but had the same issue as the new camera when once I changed my router's password. So now both camera cant connect to WiFi.

i m pretty sure its a software issue, because the old camera was able to connect to wifi just before i tried to set it up again with my new wi fi password.

please help...

[JavaLawyer]

You can try using a wired connection and log into the DCS-5020L web UI using a web browser. Next navigate to SETUP > Wireless Setup > Wireless Settings. Next, manually enter your network credentials.

Your old DCS-5020L that's already configured should work fine after you enter the network settings manually. You can configure the new DCS-5020L while the device has a wired connection, and then manually enter the wireless credentials as described above and remove the wired connection.

One point to note: What firmware version are you running? If you updated your DCS-5020L firmware since purchasing the camera, you should download the latest Setup Wizard application to match your firmware version rather than using the Setup Wizard CD that came with the camera.

[RYAT3]

Did you make your password long or complex?
Try something simple first.

i recently bought a new DLINK 5020L, so when trying to set it up, following the instruction on the installation CD, my WiFi wasn't able to detect the camera so i retried the procedure several times, made sure my password is correct and other devices were easily connected to Wi Fi without any problem. distance, password, everything was fine but the Edimax router still couldn't detect the camera...

I have another DLINK 5020L which was connecting normally to the same WiFi, but had the same issue as the new camera when once I changed my router's password. So now both camera cant connect to WiFi.

i m pretty sure its a software issue, because the old camera was able to connect to wifi just before i tried to set it up again with my new wi fi password.

please help...

[Louike]

i am experiencing the same problem, i cant reconnect to my wifi since i changed to a different channel. now when i set it back to the previous one, it wont connect either.