• November 01, 2024, 02:29:11 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Is my router suppose to do this?  (Read 2592 times)

Lundorff

  • Level 1 Member
  • *
  • Posts: 1
Is my router suppose to do this?
« on: May 07, 2015, 11:56:46 PM »

Hi, new guy here so please correct me if this is the wrong section.

I was having weird network connectivity problems (semi-lag and unresponsive website), and when I checked the router it had begun blinking like crazy: http://youtu.be/mmzaLaojSmY (please excuse the dust...)

Stuff I have tried:

1) I thought perhaps someone had figured out my password, but a "net view" reveals no additional connections.
2) I have tried turning it on and off to no avail.
3) I have tried a factory reset, but no cigar.
4) I can connect directly to the modem without any problems.
5) I have tried switching back and forth between Google Open DNS IP vs. obtaining one automatically, but it doesn't seems to have any correlation.
6) This morning I tried to reconnect and although it's still blinking, I no longer have any connectivity issues.

Is it normal for a router to blink like that? I did not have any active devices connected when I recorded the video.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Is my router suppose to do this?
« Reply #1 on: May 08, 2015, 12:52:21 PM »

Your video is not viewable. It says it's private.  ???

Router:
Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?
  • Are you wired or wireless connected to the router?
  • Has a Factory Reset been performed?
  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process
  • Was the router working before any firmware updates?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
  • Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
  • What ISP Modem service link speeds UP and Down do you have? Link> Speed Testing Sites
  • By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds.
  • Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
  • Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.