Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[traverse]

I just updated my dcs-5009l camera with ver 1.06 of the firmware and camera resets itself randomly.
It will just reset for no reason anywhere from 2 hours to about 45 minutes.  It's been doing it all day.
Needless to say, once it does the reset the camera is not view able thru the d-link website.

Prior to the update, firmware ver 1.04, it would reset itself about every two days.

Any ideas?

[FurryNutz]

Link>Welcome!

• What region are you located?

What a factory reset performed before and after the FW update then setup from scratch?

I recommend using a Static IP address ON the DCS set to 192.168.#.59 or .90.
What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?

[traverse]

dcs-5009l  hw ver A1
software version 1.06 now (have had similar resetting problem at all levels of s/w up to this point but nothing this frequent)
located in michigan

router is pace plc., model 5031NV-030, isp at&t
wireless mode : WPA-PSK (TKIP)/WPA2-PSK (AES)   
Connection Type   Wireless (802.11)
IP Address   192.168.1.68
IP Address Allocation   DHCP

distance between router and dcs is about 4 feet

[FurryNutz]

Can you set WPA2/AES only on the router?
Try manual channel 1, 6 or 11?

[traverse]

using channel 1 now.
No not an option for WPA2-PSK (AES)  only.

[FurryNutz]

Ensure uPnP and uPnP Port Forwarding is enabled as well ON the camera. Keep us posted.