Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[wedraft]

The dlink cameras 932, 5010 do not connect back to the network after a power outage. It does not matter whether they are wired or wireless. To reconnect you need to power them off and on and then they connect back to network. Looks like the cameras only try once after a power outage to reconnect. It should be a simple solution within the firmware for cameras to try again in 5minutes or so to reconnect after power is back on!

Come on DLINK this is doable and easy fix!

I love the cameras as they are easy to install and provide a good image. But this simple issue could make me change my 5 cameras to something that is more reliable...

[FurryNutz]

Link>Welcome!

• What Hardware version is your DCS? Look at the sticker behind or under the camera.
• Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
• What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool: 192.168.#.10 and .11  DHCP

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com