I'm trying to setup simple static routing on lan.
My lannet is 10.0.2.0/24 and GW is 10.0.2.1
I have another device connected on lannet with local ip of 10.0.2.6 and i want to route traffic with ip's 192.168.207.154 to 10.0.2.6.
I've setup a static route and when using router icmp tool I get all success response. When i look at the logs I see:
Date Severity Category/ID Rule Proto Src/DstIf Src/DstIP Src/DstPort Event/Action
2016-02-08 14:46:09 Warning RULE 6000051 Default_Rule ICMP lan 10.0.2.37 192.168.207.154 ruleset_drop_packet drop
ipdatalen=40 icmptype=ECHO_REQUEST echoid=1 echoseq=120
Where is the option that is blocking the icmp ?
Also, I've setup a rule that would allow the connection on all ports for that network, but when I send request over port 8080 this is what I get in the logs:
Date Severity Category/ID Rule Proto Src/DstIf Src/DstIP Src/DstPort Event/Action
2016-02-08 14:47:52 Debug CONN 600001 ping_fw_custom TCP lan lan 10.0.2.37 192.168.207.154 53800 8080 conn_open
however I don't get anything back. Its like the traffic is going only one way...?
Anyone has any ideas?
Thanks.
Author
Topic: Simple routing not so simple (Read 5080 times)