Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[outlawgold]

I have a dlink di624...I hook up to cable modem...I can see both a wireless network and I can run ethernet cable from 624 to laptop....in either case I get no internet....on wireless it asks for network passcode...when entered it says not the passcode....I can run ethernet cable from modem to laptop and Im good...Ive done a factory reset on 624 but still no internet....all lights on 624 indicate its working....I cannot enter url to configure because I cant get internet through 624...any suggestions? I am replacing a failing linksys router....I know the 624 is old but worked great at last use.....thanks for any response.

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
• What ISP Modem service link speeds UP and Down do you have? Link> Speed Testing Sites
• By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds.
• Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
• Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values

What PC OS are you using?

[RYAT3]

Did you enter the default password?

You don't need to enter Internet to get to router web page.

It's pretty well obsolete.  Mine just died one day.

http://www.cnet.com/products/d-link-di-624-router/specs/

[Hard Harry]

What model modem are you connecting it to?

Also, have you factory reset it and set it back up?

[FurryNutz]

Just FYI, one of your questions was already asked. Just saying. 

What model modem are you connecting it to?

Also, have you factory reset it and set it back up?

[FurryNutz]

Any status on this? 

I have a dlink di624...I hook up to cable modem...I can see both a wireless network and I can run ethernet cable from 624 to laptop....in either case I get no internet....on wireless it asks for network passcode...when entered it says not the passcode....I can run ethernet cable from modem to laptop and Im good...Ive done a factory reset on 624 but still no internet....all lights on 624 indicate its working....I cannot enter url to configure because I cant get internet through 624...any suggestions? I am replacing a failing linksys router....I know the 624 is old but worked great at last use.....thanks for any response.