Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mostafa]

Hello    evey body
I don't connect to wifi because the wifi network isn't be identified in my labtop but I can connect to it by my phone . I connect by my phone to router setting (192.168.1.1) and in Wireless Setup I go to Manual Wireless Network Setup and tap to Apply Setting then wifi network is be identified in my labtop and now I connet to network   

Router Details :
Model : DSL-2600U
H/W Ver. : Z1
firmware  ver. : 1.0.0

Thank You ! 

[FurryNutz]

Link>Welcome!

• What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
• Ensure any devices with WiFi adapter drivers are updated.

[mostafa]

Thank you for the reply.
Middle East - Iran
I tried all of them but my problem has not been solved .
my Wireless setup
http://s1.picofile.com/file/8260550468/dsl_2600u.PNG

[FurryNutz]

Any chance that you can test a Windows 7 laptop as a test to see if the problem happens there as well? Seen various problems with Windows 10 and it's networking handling.