Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GreenBay42]

New firmware released.

Firmware --> ftp://FTP2.DLINK.COM/PRODUCTS/DCS-4703E/REVA/DCS-4703E_REVA_FIRMWARE_v1.01.zip


Release Notes:

Features added:
1. Supports XSS Specification 2.0.0.
2. Supports new rule signing digital signature.
3. Supports Japanese language.

Enhancements:
1. Update html version to v2.02.08_min.
2. Update copyright information to 2017.
3. Modify ONVIF device information and scope name.

Problem resolved:
1. Fixed issue of "When login or edit new password is not encrypted strongly" (D-Lab)

[t1tom]

Hi,

Some issues I observed after upgrading to 1.01.00 firmware:

First I had some recurring freezes with the cam. I can ping the device however the webinterface is not accessible.
I found it was certainly due to motion detection. After disabling it, the problem seemed to be solved.
I use motion/motioneye instead using rtsp connection to the cam.

The second problem is more annoying, indeed, I observe many events in the log part saying "network port disconnected" and than some seconds later "network port connected"... it is pretty annoying notably because it is appearing very frequently in the logs...
Is anyone has the same problem with this cam and firmware

I have downgraded the cam with the previous firmware 1.00.06 and for now if I check in the log I have no event concerning the network port.

[GreenBay42]

Any luck when downgrading the firmware?

Possibly the motion detection is overloading the camera for some reason thus not being able to access the web UI. Does rebooting the camera fix this issue (temporarily)?

[t1tom]

Any luck when downgrading the firmware?

Possibly the motion detection is overloading the camera for some reason thus not being able to access the web UI. Does rebooting the camera fix this issue (temporarily)?

After having downgraded I did not reactivated the motion detection.
However it clearly resolved the other problem (logs with  "network port disconnected")

Otherwise, I agree with you, probably motion detection was overloading the camera, and indeed when it arrived, hard rebooting the cam (power off/on) was fixing the situation temporarily until the next freeze.