• November 01, 2024, 07:39:18 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: [Solved] DGS-1210-10/ME unstable  (Read 6945 times)

LukoJy

  • Level 1 Member
  • *
  • Posts: 3
[Solved] DGS-1210-10/ME unstable
« on: September 23, 2020, 12:31:47 AM »

Hey everyone!

I encountered very interesting issue. I setup my 8port DGS 1210 D-link Switch with two IP addresses, five different VLANS, SNMP and LLDP. There is only 4 ports active, 1st port trunked with other managed switch and 2-4th ports are computers in the same VLAN. The problem is that randomly (sometimes every hour, sometimes every five minutes) the switch becomes unresponsive, ping doesn't work, web GUI is inaccessible, SSH gets disconnected, SNMP monitoring stops, however the connected devices feel no impact of this.

Every single idea is highly appreciated!

EDIT: Also can't upgrade firmware. Current 6.13.B010 rev A1
« Last Edit: September 27, 2020, 11:32:52 PM by LukoJy »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DGS-1210-10/ME unstable
« Reply #1 on: September 23, 2020, 07:55:56 AM »

IF you factory reset the switch and don't set up any VLAN configurations, does the switch continue to work or does the problem still appear?
What version of FW is currently loaded?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

LukoJy

  • Level 1 Member
  • *
  • Posts: 3
Re: DGS-1210-10/ME unstable
« Reply #2 on: September 24, 2020, 01:15:12 AM »

Thanks for taking time to reply!

If I factory reset the switch, the unresponsiveness becomes less common, yet it still persists. Current firmware version is 6.13.B010 rev A1, however it cannot be upgraded, because all upgrades I found is for revision B boards...

Talked to one guy working with Dlink switches, even he mentioned DGS switches are workhorses, their processors are slow. That means they start killing processes with lower priority such as ping, http or snmp. So that might be the problem, yet I am searching for confirmation on this.  :)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DGS-1210-10/ME unstable
« Reply #3 on: September 24, 2020, 10:14:03 AM »

I would make contact with D-Link support about this. I see that Rev A files are not available. So maybe time to remove the Rev A and replace with a Rev B or something else.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

LukoJy

  • Level 1 Member
  • *
  • Posts: 3
Re: DGS-1210-10/ME unstable
« Reply #4 on: September 27, 2020, 11:28:04 PM »

I managed to solve this issue in the the strangest way...

Tried to do factory reset - nothing, tried to do port by port diagnostics - nothing, searched every possible D-link ftp server (EU, US) for firmware version that would work, yet with no success...

But as I told you earlier my device has A1 revision board, whose firmware was nowhere to be found and then it hit me: maybe different D-link domains have different region ftp servers with different firmware. Anyway after doing some search I found necessary firmware in Russian D-link ftp server here: http://ftp.dlink.ru/pub/Switch/DGS-1210-10_ME/Firmware/

After smooth upgrade via console everything got fixed: Monitoring works great, web access is very responsive, no ping loss or ssh disconnections!  ;D
« Last Edit: September 27, 2020, 11:30:35 PM by LukoJy »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: [Solved] DGS-1210-10/ME unstable (RESEOLVED)
« Reply #5 on: September 28, 2020, 05:55:05 PM »

Glad you found FW that works.
Enjoy.  ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.