• February 22, 2025, 03:14:22 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: PS3 and UPnP AV Server  (Read 10206 times)

jazzishouse

  • Level 1 Member
  • *
  • Posts: 18
PS3 and UPnP AV Server
« on: May 07, 2010, 03:34:07 AM »
Hi,

I have a setup as detailed below...

PS3 250GB Slim with up to date firmware.
DNS323 A1 with 1.09 firmware.
SKY Router
D-Link DGS-1008D

I use the PS3 to view photo's and videos via the DNS's UPnP AV server. It works very well, as does everything else I ask the DNS to do, but I've noticed something a bit odd. When I add new media I have to refresh the AV server twice before the PS3 can see the files. After the first refresh (which the DNS reports has been finished without any apparent problems) I can get as far as 'folders' on the PS3 before i get a DLNA error. After the second refresh all is fine. I've checked it a few times now and it's the same each time.

Has anybody else experienced this? Is this a known issue? It's not a big deal but I figure something isn't working quite how it should be so I though I'd mention it!
Logged

Smyle1

  • Level 1 Member
  • *
  • Posts: 14
Re: PS3 and UPnP AV Server
« Reply #1 on: May 23, 2010, 12:53:52 PM »
I have noticed this particularly with the 1.09 beta firmware. It does require a manual refresh every time...


Logged

DNSuserMTL

  • Level 1 Member
  • *
  • Posts: 4
Re: PS3 and UPnP AV Server
« Reply #2 on: May 25, 2010, 08:51:25 AM »
Is there any way to add an automatic refresh for the media server?
Logged

TJ

  • Level 2 Member
  • **
  • Posts: 54
Re: PS3 and UPnP AV Server
« Reply #3 on: March 06, 2011, 11:26:12 AM »
Sometimes if you add media while the PS3 if off, you don't have to refresh. Just sometimes.

I get the DLNA error usually if I'm copying or reanaming files on the dns while my PS3 is on. It rarely happens for me otherwise.
Logged

Eric-Tom

  • Level 1 Member
  • *
  • Posts: 20
Re: PS3 and UPnP AV Server
« Reply #4 on: March 15, 2011, 06:12:38 PM »
I have this issue with 1.09 as well. Every time I want to watch something on PS3, I have to refresh the server or it won't show up on the media list. It seems if I turn off the PS3 and leave the house for four hours or so, then turn the PS3 back on, the UPnP server is gone again. I have to refresh it everytime EVEN if I don't add new movies in to the server. This is annoying >:(
Logged
DIR-825(Main Router)
DIR-655(Used as a wireless access point to extend the coverage)
DGS-1005G 5-Port Gigabit Desktop Switch
DNS-323 NAS with 2 WD 1.5TB in Standard 2 volume set up
PS3, my own server and 5 other computers on the network with BlackBerry 9700 and iPod on wifi

Eric-Tom

  • Level 1 Member
  • *
  • Posts: 20
Re: PS3 and UPnP AV Server
« Reply #5 on: March 16, 2011, 04:18:32 PM »
Can someone from D-link kindly help us over here? At least a comment on this issue?
Logged
DIR-825(Main Router)
DIR-655(Used as a wireless access point to extend the coverage)
DGS-1005G 5-Port Gigabit Desktop Switch
DNS-323 NAS with 2 WD 1.5TB in Standard 2 volume set up
PS3, my own server and 5 other computers on the network with BlackBerry 9700 and iPod on wifi

wirelessly

  • Level 1 Member
  • *
  • Posts: 5
Re: PS3 and UPnP AV Server
« Reply #6 on: March 31, 2011, 03:42:34 PM »
Same issues.

I reverted back to 1.08b09 and it works much better. I was having it go missing in 1.10 and 1.09 after every power off. 1.10 would not have any files when you navigated through to the album etc

Found 1.10b05 buggy in other ways and unreliable for basic disk access under windows 7.

waiting for full release before I go anywhere near it again.
Logged

ericj

  • Level 1 Member
  • *
  • Posts: 17
Re: PS3 and UPnP AV Server
« Reply #7 on: April 11, 2011, 11:12:07 PM »
You guys may want to post this in the bugs thread for 1.10b6 so that the moderator can see the issues you're running into.
Logged