Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stonetownmike]

A new 06-30-10 release has been posted at the dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/ download site if you're feeling adventurous (I'm not). Note that these are test builds. The last release recommended on the dd-wrt database is the 14311 beta build.

[stereo55]

Boy , another update already ... cool . Updating now .

Much thanks Skello .  

I'll report back my findings .

I am also seeing random disconnects on my C1 set as a wireless bridge with the 14594 version. I have reported the issue on the dd-wrt forum and got some suggestions for settings, but it is still happening, although it has been > 1 day since I had to unplug the bridge. Letting it soak a while to see if it stays up.

Reporting back on my C1 ... unfortunately same status for me still even with the new version ; unknown random disconnects as before . Tried various settings again all N speed (no mixed mode being used)  Again tried 20/40 , 40  , differant anttena settings , the whole gambit possibilities , etc .

Funny thing is , once a disconnect has happened and the router is powered down and back up  and I USE the connection , Iam fine for the whole time Iam using the connection ; its when the connection is NOT being used (sits idle) is when the disconnect happens at some point .

One thing Ive noticed too (maybe my lack of using "bridge" knowledge) , but I can only use channel 11 , there no other options/channels available as in say in a normal router or AP mode . I know 20/40 or 40 limits you in that reguard ; just was surprised that only one channel shows in bridge mode (normal ?) , as my 655 gives me afew channel options in those modes .  

[skyml]

Hello Skello.

I purchased DIR-615 with firmwvare version E4 and upgrade with emergency room web interface.  After 100% complete message, nothing happened.   I tried this with Explorer and Firefox and it's the same symptom.   Could you share your experience about the symptom and any solutions?

Thanks
Jake.

[carbonic]

Skyml.
If you want people to use their time to help you, you have to use time yourself to write a proper description of what went wrong.

"I installed it, nothing happened" isn't really enough

[simporis]

Hello Everyone.

I am having trouble here. I can do a 30/30/30 (hard) reset on my DIR-615 D2 and I upload the latest firmware, and the emergency room page says Everything is fine. But after that I cannot access the router at all. everytime i enter the routers address IE says 'cannot display the webpage'
.
I know its probably a laymen mistake, but I cant figure out whats going wrong.
Any help would be gladly appreciated, as my girlfriend is getting very angry with me over our poor wifi signal!

[carbonic]

Simporis:
Are you using http://192.168.1.1/ ? that's the default address for accessing DD-WRT flashed routers.

[Skello]

Unfortunately I didn't have too much time lately to check back and help everyone. However, for people who are reporting that nothing happens after successful flash from ER, here is a quote from my guide:

If the DD-WRT flash works, reboot your router and set your Ethernet adapter to obtain IP automatically then try to access http://192.168.1.1 .

I cannot stress that enough.

[Aenslead]

@ Skello:

YOU SIR, are a genius. Thank you for suggesting DD-WRT. I flashed my DIR-600 and can finally access my VPN through Cisco's AnyConnect.

D-Link has constantly lowered their standards and I wouldn't have gotten this router unless my ISP gave it to me for free. I used to be their product manager, now I only use Linksys.

Thanks again!

[fike]

Are you sure this will work for the Dir-615 v4.00 (updated to v4.11 already) D1? because on the site it says it isn't supported..(in the router database)

[carbonic]

It says it isn't supported because DD-WRT have not received a D1 router to test the firmware on. It doesn't mean it doesn't work, just that they can't say that it does.

I myself have a DIR-615 D1 that originally was 4.00 updated to 4.11/4.12 that now has DD-WRT installed.

[Hoborg]

C2: Try the one for C1. It might work, but I don't have confirmation. If you test it and it works post on this topic so I can update this info.

yeah its c1 version works great with c2 rev too... it's about 5 months i'm using dd-wrt's latest versions on my c2 and had no problem, but wan led; it doesn't change to orange color when there's no internet access and it's always green! that's not important... the most important thing is that dd-wrt works great and is too far better than d-link's firmware...!

everybody don't forget that for the first time use emergency room and dir615c1-factory-to-ddwrt-firmware.bin . if you had any problem with that file just hex edit its last line to 00AP81-AR9130-RT-070614-02 (using for example NEO hex editor on windows) and try again using emergency room (how to get through the emergency room : http://forums.dlink.com/index.php?topic=10285.msg72088#msg72088 )...

for the next times first go to Administration > Backup on your dd-wrt firmware and backup all of your router's data and then go to Administration > Firmware Upgrade and upgrade your dd-wrt with that dir615c1-firmware.bin file...

Have a good time with the great DD-WRT
Always update to the newest version

--------------------

DD-WRT Version 24-sp2 std (SVN revision 14929) released yesterday (08-12-2010) for rev C1/C2 :

ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/08-12-10-r14929/dlink-dir615c1/

for other revisions : ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/08-12-10-r14929/

always be up-to-dated : ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/

 

[Dukenukemx]

I know that the B2 is not supported by DD-WRT, but what about other alternatives?  Like Open-WRT?  Anything other then the stock firmware. 

[JATG]

Hello people!

I flashed my DIR-615 rev D1 with sucess but I can not acess to the Internet. Then I restore the original D-Link factory firmware v4.11 and I acess to the Internet again.


Do you know why I can`t acess to Internet with DD-WRT firmware?

Thanks!

[Skello]

I know that the B2 is not supported by DD-WRT, but what about other alternatives?  Like Open-WRT?  Anything other then the stock firmware. 

DD-WRT is based on Open-WRT. So basically if Open-WRT would have support for whatever wireless chipset is in B2, then DD-WRT would have it too.

[Skello]

Hello people!

I flashed my DIR-615 rev D1 with sucess but I can not acess to the Internet. Then I restore the original D-Link factory firmware v4.11 and I acess to the Internet again.


Do you know why I can`t acess to Internet with DD-WRT firmware?

Thanks!

What kind of Internet access do you have? Static IP, Dynamic IP, PPPoE?