Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RCAAS]

First into the router configuration that was using the dd-wrt I put to use the track ip 192.168.0.1. The router was handing out dhcp. Before turning off the router was configured and both "proprioedades TCP/IPv4 protocol" and changed the "general configuration" using the ip 192.168.0.3 and also changed the "alternate configuration" using the same ip "192.168.0.3". When I start the "emergency" of guy I managed to activate the browse. Another tip is to use firefox 3.5.19. Thank you!

Sorry for my english

[FurryNutz]

Enjoy.

[swendz]

can someone help me enable wireless radio? it also stops working after installing DD-WRT.. my router is DIR-615 C2 ver 3.01 originally... it still works via Ethernet cable

[swendz]

i am using DHCP connection... modem is zyxel p800 series

[FurryNutz]

You'll need to refer to the WRT forums and site for help with WRT loaded routers.

can someone help me enable wireless radio? it also stops working after installing DD-WRT.. my router is DIR-615 C2 ver 3.01 originally... it still works via Ethernet cable

[wnb9581]

hi all//

am newbie user for dlink router,actually i'm use dlink dir615 Firmware Version : 7.09
the problem now,i cant find way how to upload file .Bin (i've already download tht file)

1. From the D-Link firmware's Web interface. Go to Tools > Firmware and under "Firmware Upgrade" press Browse, select the DD-WRT file and hit Upload.

2. From the router's Emergency Room Web interface. To access the Emergency Room Web interface follow these steps:

Unplug the router's power cord and wait 20 seconds.
Get a pin, push the RESET button and KEEP IT PRESSED.
Connect the power cord back (while still keeping the reset button pressed)
Keep the reset button pressed for an additional 5 seconds after connecting power cord and then release. At this point you should see the power button blinking orange.
Connect over a WIRED connection to the router and set your network adapter IP MANUALLY to 192.168.0.2
Open http://192.168.0.1 in a browser. You should see a white page with a Browse and Upload button.


FOR the 1st step,my dlink interface not have "Tools" button.only have (SETUP,ADVANCE,MAINTENANCE,STATUS,HELP)

FOR 2ND STEP :nothing change,i mean still like previous configrtion.


thanks guy,hope can help me A.S.A.P

[FurryNutz]

I recommend that you refer to the WRT web site for information regarding using WRT on your router. Make sure your HW rev is supported.

[wnb9581]

when i'm try to do emergency room,the power button appear orange color but not blinking.. and how?

[FurryNutz]

Follow this?
Emergency Recovery Mode

[shawnmos]

can someone help me enable wireless radio? it also stops working after installing DD-WRT.. my router is DIR-615 C2 ver 3.01 originally... it still works via Ethernet cable

Enable MAC address cloning in the setup menu then reboot the router. Don't ask why it works, but it works. It's a bug.

[doole]

Can someone tell me wich version of dd-wrt frimware for dir-615 h2 have working wireless access gui. I've installed 12-24-2013-r23204 and wireless access gui option is not working, it still let my clients from wifi to access to my router gui.

[adrianabubakar]

Hi. I've tried searching the forum but couldn't get a hit. My DIR-615 is h/w version G2. Some research on google suggests its compatible with version Dx (D1,D2,D3,D4) or possibly D3. Anyone here know for sure which version DD-WRT would work best for DIR-615 vG2?

[FurryNutz]

You should post this question on the WRT forum site as well. You may get more response there.

Good Luck.

Hi. I've tried searching the forum but couldn't get a hit. My DIR-615 is h/w version G2. Some research on google suggests its compatible with version Dx (D1,D2,D3,D4) or possibly D3. Anyone here know for sure which version DD-WRT would work best for DIR-615 vG2?

[tuklu_san]

Success and rock-steady on C1 using Build 21061. Radio did not turn on by default; enabling MAC Address Clone solves the issue and Wireless radio works fine.

[FurryNutz]

Enjoy. 

Success and rock-steady on C1 using Build 21061. Radio did not turn on by default; enabling MAC Address Clone solves the issue and Wireless radio works fine.