Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[changing]

Hi all, I am new here.

May I knw why i am getting 52mpbs, sometime during game is 104mbps. but it does not hit 300mbps as stated on the router manual? i use all N equipment, so it is not hardware fault. But I am not sure how to achieve the 300mbps. can any kind soul pls teach me? or is there is thread open for it?
currently my firmware is 1.20, using wpa settings.
Thanks for taking time help me
regards
changing

[Neblinio]

Did you read the sticky post on this forum?

http://forums.dlink.com/index.php?topic=616.0


Also you can try the newest beta firmware found here
ftp://ftp.dlink.com/Gateway/dir655/Firmware/dir655_firmware_121b05_beta_nosecurespot.zip

[changing]

thanks for your reply.
May I ask that the 3 condition is for which version ?
I have tried, but it is still at 52mbps sometime max is 104 mbps.

pls advise
thanks

[EddieZ]

Could you please list the brands and devices you use?

[MitchSchaft]

Are you using Cat6 or Cat5? Did you make it yourself or buy it?

[changing]

i using TP link TL-WN821N adapter but Dlink router.

more info of this adapter: http://www.tp-link.com/products/product_des.asp?id=140

what do you mean by cat 5 or 6? is it from router to modem or pc, If it is the question, i am wireless not wired connection.

using window configuration. Last nite, i on alot online application, max it hit was 161 mbps then drop down. very unstable, even though i have flashed to 1.21 , how do i static the 300Mbps, pls advise.
thanks

[davevt31]

You probably won't be able to see 300 with that adapter.  In order for an adapter to hit the 300 speed it needs to be able to operate on the 40 MHZ channel width to hit 300 with this router.  They don't list what chipset is in this adapter but it most likely only operates on the 20 MHz channel.

[EddieZ]

TP link uses Atheros chipsets.

[changing]

atheros chipset meaning?
so there is no way i going to get 300Mbps with this adapter?
thanks forthe reply.

[davevt31]

The Atheros chipset is what is used in the DLink products, so you should be able to connect to the router at higher connection speeds.  You may have to check into the advanced porperties of your adapter in the Device Manager to see if some of these may need to be tweaked to get the higher speeds.

[changing]

IcIc, so how do i set the settings in the device manager? what might be the consquences that may result from wrong settings to its default settings? I very scared if i am going to make spoilt it, even though it is under warranty. please kindly advise me
thanks

[davevt31]

You won't void any warranties changing settings in the device manager.  Open the device manager find you nic, right click it and select properties, there should be an advanced tab where you can change its settings.  Depending on your adapter there may or may not be a lot of choices here.  If you are unsure of your changes , write down what all the original ones are first.  If there is a manual for this adapter it may tell of what settings can be changed and what each one does.  Also Google can be your friend for finding explanations of what each setting does.

[EddieZ]

Devices from the same manufacturer are usually (more or less) guaranteed to work well together. Eventhough the same chipset brand is used, there can be differences in feature implementation and versioning by the vendor, causing issues that can affect connection speed.

There is nothing you can destroy with the settingss in NIC properties.

[changing]

is there a way to make it more stable.
while gaming in counterstrike souce, it lags on and off very time.
quite distribing compared with my dgl-4300 wireless G
is there a thread to stablize the transfer and recieve speed.
i notice i am sending out alotof bytes, even though i am not surffing the web or on any online application.
thanks

[Reinvented]

Wireless signals are constantly transmitting and receiving whether or not you are browsing.  Even when your computer is on, because that's how it maintains a connection.

As far as making it more stable, you'd need to reduce interference between the devices.