• February 23, 2025, 10:12:15 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DMZ Transparent Mode  (Read 6794 times)

bubbleman

  • Level 1 Member
  • *
  • Posts: 11
DMZ Transparent Mode
« on: February 11, 2011, 03:05:34 PM »
Hi everyone, I need to change the DFL-800 configuration, in this way:

WAN1: IP Public (XXX.82.215.94) / Net: XXX.82.215.88/29 / Gateway: XXX.82.215.89
DMZ: (servers with ip public) for example: PBX with two nics: IP PUBLIC: XX.82.215.90 and IP LAN: 10.100.1.6

I don't know how to configure DMZ, to work in transparent mode, because the servers need to connect to internet with IP public, and without NAT.

Any suggestion would be appreciate.

Thxs. ???
« Last Edit: February 15, 2011, 12:38:43 AM by bubbleman »
Logged

silver_surfer30

  • Level 3 Member
  • ***
  • Posts: 107
Re: DMZ Transparent Mode
« Reply #1 on: February 13, 2011, 04:52:09 AM »
what you can do is to configure the dmz interface with same ip settings than the wan1 interface and in the interface/ethernet/dmz tick the enable transparent mode box.
Your servers will have as default gatewy your isp router.
Logged

bubbleman

  • Level 1 Member
  • *
  • Posts: 11
Re: DMZ Transparent Mode
« Reply #2 on: February 13, 2011, 06:52:37 AM »
I have tried this. But the server cannot reached to/from the public IP. I fact, from tools/ping inside the FW, I cannot ping to the public ip.

Now, the DMZ have the same IP, same network, and same gateway. And transparent mode in dmz interface.

Maybe I need add some Ip rules.??

Thxs.
« Last Edit: February 13, 2011, 06:59:06 AM by bubbleman »
Logged

silver_surfer30

  • Level 3 Member
  • ***
  • Posts: 107
Re: DMZ Transparent Mode
« Reply #3 on: February 13, 2011, 10:26:01 AM »
you need to do the reverse allow rule from the wan1 to the dmz.
Logged

bubbleman

  • Level 1 Member
  • *
  • Posts: 11
Re: DMZ Transparent Mode
« Reply #4 on: February 13, 2011, 10:33:06 AM »
Could you give more details? I have no experience with this brand firewall.

Thxs.
Logged

bubbleman

  • Level 1 Member
  • *
  • Posts: 11
Re: DMZ Transparent Mode
« Reply #5 on: February 14, 2011, 07:28:30 AM »
Hi, I have include an images about the actual configuration, maybe could help to see if Im doing something wrong.

Mainroutes:


Ethernet:


IP Rules:


Interfaces:


And I have connected the PBX Public Nic direcly to DMZ port, and from ping tools inside the firewall I cannot ping to PBX and from PBX cannot reach internet.

Thanks ;-)






« Last Edit: February 14, 2011, 07:45:11 AM by bubbleman »
Logged

bubbleman

  • Level 1 Member
  • *
  • Posts: 11
Re: DMZ Transparent Mode
« Reply #6 on: February 15, 2011, 12:42:05 AM »
Finally, I solved the problem, You need to activate the transparent mode in both DMZ and WAN, and works.  ;D
Logged