Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tzabo]

I tried to upgrade the firmware to 104 form 103.  The browser interface timed out during the upgrade and the d-link didn't upgrade properly.  Waited an hour without any luck.  Tried to do a reboot and it wouldn't reboot either.  The D-Link just loops now.  I believe there isn't any firmware on the box anymore.  Is there any way to put the firmware back?

[D-Link Multimedia]

Try removing any disks from the unit (make sure you mark them so you can keep order). Try booting it up a couple times like that. If you get it up flash the firmware again then re-insert your drives.

[tzabo]

Unplugged the D-link and removed the drives plugged it back in I get the following messages on the display:
System is rebooting followed by the Large D-link logo followed by system restarting.  It keeps repeating these three screens.  I unplugged it several times and still get the same repeating messages.

[D-Link Multimedia]

Even though the Unit says rebooting have you tried checking if it is appearing on the network (via router list or ping).

[tzabo]

Can only see my D-Link 323 using the easy search software.  I checked under networking as well and can only see my D-Link 232. No 343.  Not sure how to ping it I don't know the ip address.

[gibber]

I had no problems upgrading my DSN 343.

Just send it back for your warranty and keep your drives for a replacement unit.

Good luck.

[JavaLawyer]

Not sure how to ping it I don't know the ip address.

Open your router firmware, there should be a page listing all attached devices along with their IP address.  From there you should be able to ping your DNS-343.

[iuliand]

...  Not sure how to ping it I don't know the ip address.

Use SoftPerfect Network Scanner to find if it can be seen on the network (and find the IP). It's freeware btw.