Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[trumso]

Dear all,

After I did the firmware upgrade for my DCS-930L, I always get the warning message when i try to log in the Camera Setting:

"Content was blocked because it was not signed by a valid security certificate.
For more information, see "Certificate Errors" in Internet Explorer Help."

If I choose "Display Blocked Content", I can continue but I can not view the Live Video.

Please, help me to fix this problem.
Thanks
 

[JavaLawyer]

Please, help me to fix this problem.

If you are unable to resolve this issue, you can revert to your prior firmware version.  I believe using the "Reset" button on the back of the camera will only set the camera user settings to default values, not the firmware.

(1) Obtain a copy of the old firmware and save to your desktop
(2) login to the web GUI and save your settings: Maintenance -> System -> Save to Local Hard Drive. This file will enable you to quickly restore your user/wireless settings if future problems occur.
(3) Reset your user settings (holding the reset button on the rear of the DCS)
(4) Upload the old firmware: Maintenance -> Firmware Updgrade
(5) Run the Setup Wizard
(6) If things still don't work out, you can always restore the settings file  that you saved to your desktop in step "2".

[trumso]

If you are unable to resolve this issue, you can revert to your prior firmware version.  I believe using the "Reset" button on the back of the camera will only set the camera user settings to default values, not the firmware.
(1) Obtain a copy of the old firmware and save to your desktop

Thanks for your quickly reply. I already tried to google, but I could not find out any prior firmware version. Could you please give me the link?
Thanks

[JavaLawyer]

Thanks for your quickly reply. I already tried to google, but I could not find out any prior firmware version. Could you please give me the link?
Thanks

Here's something to try:

(1) save your configuration settings file (like I described in my prior post).
(2) take note of the firmware version and date (Maintenance -> Firmware Upgrade)
(3a) Restore factory default using the button on the rear of the camera (as per the user manual)
(3b) The manual also describes a reset procedure where you place a paperclip in the pinhole on the rear of the camera.
(4) Revisit the web GUI (Maintenance -> Firmware Upgrade) to see if the firmware was also reset

If the firmware version is still the same, you can upload the file created during step "1" to restore everything.

[JavaLawyer]

trumso -- please note some modifications I made to my last post regarding the (possible) reset procedures.

[trumso]

trumso -- please note some modifications I made to my last post regarding the (possible) reset procedures.

Thanks. I will try your way to revert to the prior firmware version back when I back home.
Nice weekend! 

[JavaLawyer]

Thanks. I will try your way to revert to the prior firmware version back when I back home.
Nice weekend! 

Thanks. . . . A more definitive approach is to call D-Link technical support (assuming your are still within warranty) and ask them for the procedure for resetting the factory default firmware (and post here!).

[GliderPro]

Is there a way to remotely reset the camera?  Another post mentioned using FTP, how do you do that?

I too received the notice to upgrade while operating remotely, ignored it (couldn't follow directions without physical access), and now I cannot connect to the camera.

Curiously, I can get logged into mydlink fine via Firefox browser and using my android phone app, but Internet Explorer, ver 9, comes up with a website error.

My camera had been operating for about 2 weeks, but has now been offline for 4 days.  I had the cable company do a remote reset of the modem and they could tell the router was working fine as well.

Please let me know if there is any ideas how to get the camera online again.

Thanks

[DaltonMcmickle]

hi,i am new here.
Hope to have loads of fun and learn also share a lot of my experiences .
thanks.





__________________________
ps3 controller, wenzel tents, ps3 accessories, tents, xbox 360 controller, ps3 games

[TD99]

Looks like they (D-Link) is pushing their firmware update again. Was just notified when I logged into MyDlink.

[JavaLawyer]

Looks like they (D-Link) is pushing their firmware update again. Was just notified when I logged into MyDlink.

Do you know what changes were made?

[rjmmoon]

I have not received a second notice of firmware upgrade for the 930L's, and NEVER received a request to upgrade the firmware of my 932L.

[JavaLawyer]

I have not received a second notice of firmware upgrade for the 930L's, and NEVER received a request to upgrade the firmware of my 932L.

Nor have I. Not sure what initiates the upgrade request, as I have not seen this anywhere.

[TD99]

Do you know what changes were made?

Nope. It's nowhere to be found. I'd like to know too.

Nor have I. Not sure what initiates the upgrade request, as I have not seen this anywhere.

I receive the notice when attempting to connect to any camera using the mydlink.com site. Here's a screencap:

[JavaLawyer]

I receive the notice when attempting to connect to any camera using the mydlink.com site. Here's a screencap:

Strange. I spoke with D-link tech support last week. They indicated that there were never any firmware updates for the DCS-930L/932L series and that the existing v1.0 firmware wasn't available to users (or D-Link internal) as a download for manual upgrading.