Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[anav_ds]

I loaded curl and tranmission for the DNS 320 and changed the transmission_home line information to /mnt/HD/HD_a2/.tranmission-daemon.

When I envoke the long input startingwith su nobody,  the following is the output.
Specifically the last three lines.  Assuming something is amiss before I proceed further??

¨(output)
Transmission 2.32 (12523)  http://www.transmissionbt.com/
A fast and easy BitTorrent client

transmission-daemon is a headless Transmission session
that can be controlled via transmission-remote
or the web interface.

Usage: transmission-daemon [options]

Options:
 -h   --help                             Display this help page and exit
 -a   --allowed              <list>      Allowed IP addresses. (Default:
                                         127.0.0.1)
 -b   --blocklist                        Enable peer blocklists
 -B   --no-blocklist                     Disable peer blocklists
 -c   --watch-dir            <directory> Where to watch for new .torrent files
 -C   --no-watch-dir                     Disable the watch-dir
      --incomplete-dir       <directory> Where to store new torrents until
                                         they're complete
      --no-incomplete-dir                Don't store incomplete torrents in a
                                         different location
 -d   --dump-settings                    Dump the settings and exit
 -e   --logfile              <filename>  Dump the log messages to this filename
 -f   --foreground                       Run in the foreground instead of
                                         daemonizing
 -g   --config-dir           <path>      Where to look for configuration files
 -p   --port                 <port>      RPC port (Default: 9091)
 -t   --auth                             Require authentication
 -T   --no-auth                          Don't require authentication
 -u   --username             <username>  Set username for authentication
 -v   --password             <password>  Set password for authentication
 -V   --version                          Show version number and exit
      --log-error                        Show error messages
      --log-info                         Show error and info messages
      --log-debug                        Show error, info, and debug messages
 -w   --download-dir         <path>      Where to save downloaded data
      --paused                           Pause all torrents on startup
 -o   --dht                              Enable distributed hash tables (DHT)
 -O   --no-dht                           Disable distributed hash tables (DHT)
 -y   --lpd                              Enable local peer discovery (LPD)
 -Y   --no-lpd                           Disable local peer discovery (LPD)
      --utp                              Enable uTP for peer connections
      --no-utp                           Disable uTP for peer connections
 -P   --peerport             <port>      Port for incoming peers (Default:
                                         51413)
 -m   --portmap                          Enable portmapping via NAT-PMP or UPnP
 -M   --no-portmap                       Disable portmapping
 -L   --peerlimit-global     <limit>     Maximum overall number of peers
                                         (Default: 240)
 -l   --peerlimit-torrent    <limit>     Maximum number of peers per torrent
                                         (Default: 60)
 -er  --encryption-required              Encrypt all peer connections
 -ep  --encryption-preferred             Prefer encrypted peer connections
 -et  --encryption-tolerated             Prefer unencrypted peer connections
 -i   --bind-address-ipv4    <ipv4 addr> Where to listen for peer connections
 -I   --bind-address-ipv6    <ipv6 addr> Where to listen for peer connections
 -r   --rpc-bind-address     <ipv4 addr> Where to listen for RPC connections
 -gsr --global-seedratio     ratio       All torrents, unless overridden by a
                                         per-torrent setting, should seed until
                                         a specific ratio
 -GSR --no-global-seedratio              All torrents, unless overridden by a
                                         per-torrent setting, should seed
                                         regardless of ratio
 -x   --pid-file             <pid-file>  Enable PID file
sh: /mnt/HD/HD_a2/.transmission-daemon: not found
sh: /mnt/HD/HD_a2/Downloads: not found
sh: 127.0.0.1,192.168.0.*: not found

[anav_ds]

Okay my problem was using the carriage return to separate lines on the instruction page.  I entred the instruction set as one long rambling input LOL.
Seems to be working somewhat please find below the output........  It stuck on something it cant find.........

As well it appears to be attempting port forwarding not through the router .0.1 but  through a pc,  .0.35


[16:58:12.093] Transmission 2.32 (12523) started (session.c:704)
[16:58:12.093] RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:805)
[16:58:12.093] RPC Server Adding address to whitelist: 192.168.0.* (rpc-server.c:805)
[16:58:12.093] RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:982)
[16:58:12.093] RPC Server Whitelist enabled (rpc-server.c:986)
[16:58:12.094] RPC Server Password required (rpc-server.c:989)
[16:58:12.094] UDP Failed to set receive buffer: requested 4194304, got 217088 (tr-udp.c:75)
[16:58:12.094] UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:80)
[16:58:12.094] UDP Failed to set send buffer: requested 1048576, got 217088 (tr-udp.c:86)
[16:58:12.094] UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:91)
[16:58:12.094] DHT Generating new id (tr-dht.c:309)
[16:58:12.094] Using settings from "/mnt/HD/HD_a2/.transmission-daemon" (daemon.c:488)
[16:58:12.095] Saved "/mnt/HD/HD_a2/.transmission-daemon/settings.json" (bencode.c:1721)
[16:58:12.095] transmission-daemon requiring authentication (daemon.c:508)
[16:58:12.095] Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
[16:58:12.095] Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
[16:58:15.111] Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.0.35:80/UD/?3" (upnp.c:113)
[16:58:15.111] Port Forwarding (UPnP) Local Address is "192.168.0.55" (upnp.c:115)
[16:58:15.111] Port Forwarding (UPnP) Port forwarding through "http://192.168.0.35:80/UD/?3", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.0.55:51413) (upnp.c:221)
[16:58:15.111] Port Forwarding (UPnP) Port forwarding successful! (upnp.c:224)
[16:58:15.111] Port Forwarding Forwarded (port-forwarding.c:93)
[16:59:01.385] DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
[17:00:01.742] DHT dht.transmissionbt.com:6881: Name or service not known (tr-dht.c:125)
[17:01:35.297] DHT dht.transmissionbt.com:6881: Name or service not known (tr-dht.c:125)


This seems to be an issue.

[17:00:01.742] DHT dht.transmissionbt.com:6881: Name or service not known (tr-dht.c:125)
[17:01:35.297] DHT dht.transmissionbt.com:6881: Name or service not known (tr-dht.c:125)
[17:03:16.899] DHT dht.transmissionbt.com:6881: Name or service not known (tr-dht.c:125)

and are these signficant 'Failed' comments below or did the daemon fix them??
[16:58:12.094] UDP Failed to set receive buffer: requested 4194304, got 217088 (tr-udp.c:75)
[16:58:12.094] UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:80)
[16:58:12.094] UDP Failed to set send buffer: requested 1048576, got 217088 (tr-udp.c:86)
[16:58:12.094] UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:91)
[16:58:12.094] DHT Generating new id (tr-dht.c:309)
[16:58:12.094] Using settings from "/mnt/HD/HD_a2/.transmission-daemon" (daemon.c:488)
[16:58:12.095] Saved "/mnt/HD/HD_a2/.transmission-daemon/settings.json" (bencode.c:1721)