Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JavaLawyer]

Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.

• General - Ability to add accounts without administrative access to camera settings or web interface (i.e. view only account)
• General - Add control for user language
• General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
• General - Admin password length too short
• General - Daylight savings time support
• General - Disable telnet and enable SSH for command line access
• General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
• General - Option to include date and time stamps on captured images
• General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
• General - User password length too short
• Audio - Resolve intermittent background audio clicking
• FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password");  the current messaging "Failed" provides little diagnostic value
• FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
• FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
• Motion Detection - Motion detection email on a user defined schedule
• Motion Detection - Motion detection FTP on a schedule
• Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
• Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
• mydlink - mydlink registration independent of device configuration wizard
• Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
• Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
• Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
• Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
• Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)

[RDK45]

JavaLawyer....I think that my firmware wish request (Nov 26) was in error!!

JavaLawyer.....OK for the DLink web site.  However, I was requesting a "view video only" account on the DLink Camera itself.  They allow for setting up accounts, but those accounts are "all powerful", I'd like an option for a "view video only" type so local users could view the camera video but not be able to mess with the settings.......RDK

I have just discovered that I CAN create additional ID/PW combinations and that they DO NOT have "admin" authority to access and change the camera setting.  So please remove that item from your list.

Also I strongly second the requests for a combined Schedule and Motion Detection trigger for FTP and E-Mails.

Thanks....RDK

[JavaLawyer]

JavaLawyer....I think that my firmware wish request (Nov 26) was in error!!

I have just discovered that I CAN create additional ID/PW combinations and that they DO NOT have "admin" authority to access and change the camera setting.  So please remove that item from your list.

Also I strongly second the requests for a combined Schedule and Motion Detection trigger for FTP and E-Mails.

Thanks....RDK

Thanks for catching that oversight
Removed....

[JavaLawyer]

Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.

• General - Add control for user language
• General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
• General - Admin password length too short
• General - Daylight savings time support
• General - Disable telnet and enable SSH for command line access
• General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
• General - Option to include date and time stamps on captured images
• General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
• General - User password length too short
• Audio - Resolve intermittent background audio clicking
• FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password");  the current messaging "Failed" provides little diagnostic value
• FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
• FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
• Motion Detection - Motion detection email on a user defined schedule
• Motion Detection - Motion detection FTP on a schedule
• Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
• Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
• mydlink - mydlink registration independent of device configuration wizard
• Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
• Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
• Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
• Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
• Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)

[fecauk]

Motion Detection - Motion detection email on a user defined schedule
Motion Detection - Motion detection FTP on a schedule

[JavaLawyer]

Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are striked out.

If any items in the wishlist were fixed by the latest firmware, please post and I'll update!

DCS-930L Wishlist

• General - Add control for user language
• General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
• General - Admin password length too short
• General - Daylight savings time support
• General - Disable telnet and enable SSH for command line access
• General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
• General - Option to include date and time stamps on captured images
• General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
• General - User password length too short
• Audio - Resolve intermittent background audio clicking
• FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
• FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password");  the current messaging "Failed" provides little diagnostic value
• FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
• Motion Detection - Motion detection email on a user defined schedule
• Motion Detection - Motion detection FTP on a schedule
• Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
• Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
• mydlink - mydlink registration independent of device configuration wizard
• Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
• Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
• Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
• Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
• Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)

[JavaLawyer]

Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are striked out.

If any items in the wishlist were fixed by the latest firmware, please post and I'll update!

DCS-930L Wishlist

• General - Add control for user language
• General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
• General - Admin password length too short
• General - Daylight savings time support
• General - Disable telnet and enable SSH for command line access
• General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
• General - Option to include date and time stamps on captured images
• General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
• General - User password length too short
• Audio - Resolve intermittent background audio clicking
• FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
• FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password");  the current messaging "Failed" provides little diagnostic value
• FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
• Motion Detection - Motion detection email on a user defined schedule
• Motion Detection - Motion detection FTP on a schedule
• Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
• Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
• Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
• mydlink - mydlink registration independent of device configuration wizard
• Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
• Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
• Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
• Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
• Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)

[ikecomp22]

I didn't quite see this listed but....

Motion Detection: Add delay interval for emails to prevent the camera from sending too many emails within a short time span (i.e. only send a motion detection email if 5 or 10 minutes have passed from last email alert)

[JavaLawyer]

I didn't quite see this listed but....

Motion Detection: Add delay interval for emails to prevent the camera from sending too many emails within a short time span (i.e. only send a motion detection email if 5 or 10 minutes have passed from last email alert)

Already included...

Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)

[ikecomp22]

Already included...

Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)

Sorry, didn't read the last updated list. Thanks!

[JavaLawyer]

Sorry, didn't read the last updated list. Thanks!

No problem. . . The firmware wishlist (and thread) are getting pretty long.

[JavaLawyer]

A local PC (Mac) on my LAN. I haven't enabled d-link, and am not likely to, for security reasons.

I split your question into a new post since this isn't related to the firmware wishlist: Password Issue

[JavaLawyer]

Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are striked out.

If any items in the wishlist were fixed by the latest firmware, please post and I'll update!

DCS-930L Wishlist

• General - Add control for user language
• General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
• General - Admin password length too short
• General - Daylight savings time support
• General - Disable telnet and enable SSH for command line access
• General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
• General - Option to include date and time stamps on captured images
• General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
• General - User password length too short
• Audio - Resolve intermittent background audio clicking
• FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
• FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password");  the current messaging "Failed" provides little diagnostic value
• FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
• Motion Detection - Motion detection email on a user defined schedule
• Motion Detection - Motion detection FTP on a schedule
• Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
• Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
• Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
• mydlink - mydlink registration independent of device configuration wizard
• Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
• Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
• Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
• Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
• Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)

[wind0ze]

Can you please, please add an option to bump up the wireless power? If it's beta I'm willing to test it. : )

Turns out I can't use wireless because it can't detect my network (unless in the same room). I've tried changing channels, upping my router's transmission power (mW). No wireless joy for me.

[JavaLawyer]

Can you please, please add an option to bump up the wireless power? If it's beta I'm willing to test it. : )

Turns out I can't use wireless because it can't detect my network (unless in the same room). I've tried changing channels, upping my router's transmission power (mW). No wireless joy for me.

Unfortunately, this list is only for changes impacting firmware. Increasing the wireless power may cross into the realm of hardware and may impact the technical specifications.