• February 23, 2025, 04:39:00 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Fan wouldn't stop  (Read 5195 times)

domovoy

  • Level 1 Member
  • *
  • Posts: 19
Fan wouldn't stop
« on: October 09, 2011, 03:36:56 PM »
I have a problem with my DNS-320. The fan goes on high speed and wouldn't go low at all even when temperature is low. I checked both harddrive and internal temperatures. When I update Power settings to set Off/Low/High for fan it slows down to low speed. Did anyone see something like this?
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Fan wouldn't stop
« Reply #1 on: October 09, 2011, 05:17:08 PM »
What firmware version is your DNS-320 running? Beta firmware version Firmware v2.02b01 addresses the non-stop fan issue.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

cable2

  • Level 3 Member
  • ***
  • Posts: 299
Re: Fan wouldn't stop
« Reply #2 on: October 10, 2011, 07:09:05 AM »
Hi,
Even though my unit also showed it was set to "auto-off, low, high", it stayed on high.  Try going down and re-saving the settings.  This worked for me.  Good luck.
Logged

domovoy

  • Level 1 Member
  • *
  • Posts: 19
Re: Fan wouldn't stop
« Reply #3 on: October 11, 2011, 01:46:39 PM »
I use 2.0 firmware. I saw beta firmware but I'd rather wait for released version.
Thanks.
« Last Edit: October 11, 2011, 02:04:36 PM by domovoy »
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Fan wouldn't stop
« Reply #4 on: October 12, 2011, 06:40:12 AM »
Even on firmware 2.0 the fan shouldn't stayed on high speed all the time. If you upgraded the firmware to 2.0, it best to do a reset to factory default.
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

domovoy

  • Level 1 Member
  • *
  • Posts: 19
Re: Fan wouldn't stop
« Reply #5 on: October 12, 2011, 08:44:19 AM »
Reset to factory default and then upload my settings would be work?
Logged