• July 15, 2025, 07:33:45 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSD-150 and Dir-655  (Read 5693 times)

mbradshaw

  • Level 1 Member
  • *
  • Posts: 3
DSD-150 and Dir-655
« on: February 24, 2009, 01:01:19 PM »
Network setup: Cable Modem---DSD-150---DIR-655---Computer
DSD-150 Firmware: 2.011
DIR-655 Firmware: 1.21(no securespot)

Issue: I have been having problem with the thin client not authenticating to the dsd-150.  It just doesn't work at all. :(

Tried reinstalling the thin client several times.  I can get to the http://192.168.229.61 just fine, which is the address for the DSD-150, but thin client says it can't find the device in the network or it could not authenticate.  I was wondering if anyone was having the same issue.  I tried enabling the device detection but because the thin client couldn't find the DSD the internet was totally cut off even though the device was plugged in.  I tried calling support for dlink, but i keep getting a message saying they are busy and then disconnected...  :(

Anyone have any ideas?
Logged

Toilet-Duck

  • Level 2 Member
  • **
  • Posts: 41
Re: DSD-150 and Dir-655
« Reply #1 on: February 24, 2009, 04:58:57 PM »
The DIR-655 has in built securespot just like the DSD-150 but its in built with the latest firmware, update your router with the securespot firmware for the DIR-655.

You then dont need your DSD-150  ;D
Logged

mbradshaw

  • Level 1 Member
  • *
  • Posts: 3
Re: DSD-150 and Dir-655
« Reply #2 on: February 24, 2009, 05:44:42 PM »
Well I wonder if that will work since this is the error I get from the applog.txt:

02/24/09 18:36:51 - Auth::Request (timer = 0)
02/24/09 18:37:32 - localDVP = http://192.168.0.1/dev_verify.xml
02/24/09 18:37:42 - localDVP = http://192.168.229.61/dev_verify.xml
02/24/09 18:37:42 - Device Verification -> device not found - stop Bsecure Protection
02/24/09 18:37:42 - Auth::Complete(fail)
02/24/09 18:38:08 - Auth::Request (timer = 0)
02/24/09 18:38:49 - localDVP = http://192.168.0.1/dev_verify.xml
02/24/09 18:38:49 - localDVP = http://192.168.229.61/dev_verify.xml
02/24/09 18:38:49 - Device Verification -> device not found - stop Bsecure Protection
02/24/09 18:38:49 - Auth::Complete(fail)

It checks the router and the DSD-150  I will try to get the firmware for the DIR-655.  Will I be able to switch from 1.21 to 1.21 securespot?
Logged

bluenote

  • Level 2 Member
  • **
  • Posts: 82
Re: DSD-150 and Dir-655
« Reply #3 on: February 24, 2009, 06:18:26 PM »
Just a guess but I think you might have a routing/addressing problem going on.  I notice that your device is 192.168.229.x and your router is 192.168.0.x .  Unfortunately I dont know what a DSD *is* so I can't guess if this is purposeful or not.
Logged

mbradshaw

  • Level 1 Member
  • *
  • Posts: 3
Re: DSD-150 and Dir-655
« Reply #4 on: February 24, 2009, 06:44:35 PM »
Yeah the DSD-150 has default gateway of 192.168.229.61
http://dlink.com/products/?sec=1&pid=486

Yeah Just tried calling tech support. got hung up on... will call them back.
Logged