• February 24, 2025, 10:44:58 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Cannot forward transmission's port  (Read 7164 times)

iparout

  • Level 1 Member
  • *
  • Posts: 20
Cannot forward transmission's port
« on: February 11, 2012, 04:32:21 AM »
Hi.

I installed transmission on my DNS-320 a few days ago but I cannot forward its port to my router although I have enabled UPNP and have also manually forwarded the port 51413 to my router. The port seems open from the router's interface, however Transmission still reports the port as closed.

I'm sure I'm doing something wrong (I'm a total noob when it comes to networks) but cannot understand why.

FYI, I forwarded ports 51413 and 9091 (TCP and UDP) to 192.168.1.1 (transmission's web interface is at 192.168.1.1:9091)

Any help would be much appreciated.

Thanks !

P.S. : There are stuff like DDNS, DMZ Host, DNS Service, QOS, SNTP, IGMP on my routers menu which are disabled. Don't know what they do or if I need to enable them to forward the port to the router.
« Last Edit: February 11, 2012, 04:41:42 AM by iparout »
Logged

iparout

  • Level 1 Member
  • *
  • Posts: 20
Re: Cannot forward transmission's port
« Reply #1 on: February 14, 2012, 10:59:02 AM »
bump

noone ?
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Cannot forward transmission's port
« Reply #2 on: February 14, 2012, 05:14:28 PM »
If your router has UPnP option just enable it, there's no need to do port-forward again. Also you have done it incorrectly, the target IP address is your NAS not your router!
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

iparout

  • Level 1 Member
  • *
  • Posts: 20
Re: Cannot forward transmission's port
« Reply #3 on: February 16, 2012, 01:03:51 PM »
Quote from: albert on February 14, 2012, 05:14:28 PM
If your router has UPnP option just enable it, there's no need to do port-forward again. Also you have done it incorrectly, the target IP address is your NAS not your router!

UPnP is enabled. And 192.168.1.1. is the IP address of my NAS, not my router.
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Cannot forward transmission's port
« Reply #4 on: February 16, 2012, 04:42:18 PM »
Then what's the address of your router?
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

iparout

  • Level 1 Member
  • *
  • Posts: 20
Re: Cannot forward transmission's port
« Reply #5 on: February 18, 2012, 12:35:31 AM »
Quote from: albert on February 16, 2012, 04:42:18 PM
Then what's the address of your router?

192.168.1.254
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Cannot forward transmission's port
« Reply #6 on: February 18, 2012, 05:23:49 AM »
Just ignore the port closed message and try downloading popular torrent like ubuntu linux distro to test.
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

iparout

  • Level 1 Member
  • *
  • Posts: 20
Re: Cannot forward transmission's port
« Reply #7 on: February 18, 2012, 06:25:13 AM »
Quote from: albert on February 18, 2012, 05:23:49 AM
Just ignore the port closed message and try downloading popular torrent like ubuntu linux distro to test.

I did... Nothing happens. I can download at full speed, can upload also at full speed while downloading, but when the torrent is fully downloaded (i.e. is seeding), I cannot upload at all as peers seem unable to connect to me.
Logged