Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hoples]

Hardware Version: H1     Firmware Version: 8.02 CABLE
Ok i have internet connection of 500mbps
When i hawe cable connecter po my pc directly i have speed of ~300 upload and download.
When i am connecting throught router, SPEED test shows not more than 100DL and 70~ Upload
3 pcs are connected throught router. 2 of them throught switch.

Is there any way to make my speed better ?

it looks like router splits speed equaly for all pcs :\ even then its 3Pm and all other pcs are turned off

[FurryNutz]

What Hardware version is your router? Look at sticker under router.
What Firmware version is currently loaded? Found on routers web page under status.

What ISP Service do you have? Cable or DSL?
What ISP Modem do you have? Stand Alone or built in router?
What ISP Modem make and model do you have?
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.
To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged.

Some things to try:
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and Multi-cast Streaming under Advanced/Networking.


Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

[hoples]

What Hardware version is your router? Look at sticker under router. H1
What Firmware version is currently loaded? Found on routers web page under status. 8,02

What ISP Service do you have? Cable or DSL? CABLE
What ISP Modem do you have? Stand Alone or built in router? Got no idea.Its strange little box in staircase of my building for The fiber-optic internet.
What ISP Modem make and model do you have? same no idea what in staircase
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.
To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. IP Address :   212.52.55.230

Some things to try:
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Enable QoS Engine :   
Automatic Uplink Speed :   
Measured Uplink Speed :   Not Estimated
Manual Uplink Speed :    unchecked all
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual. no such thing
Turn on DNS Relay under Setup/Networking. ON
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking DONE For all pcs
Ensure devices are set to auto obtain an IP address. Got no idea whee to do that
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Got no idea how to do that or its not there. Or its one of these : Enable DMZ :   
DMZ IP Address :   ; Enable SPI :   
Enable uPnP and Multi-cast Streaming under Advanced/Networking. DONE

Any more ideas :| ?

[FurryNutz]

Maybe someone can review your router settings with you using teamviewer.