Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[KE2QR]

As KE2QR has an almost identical router to mine, I'd be interested in knowing how it's configured.

Larry ....

My DAP is configured in REPEATER Mode.
I have assigned a static IP Address
The DHCP Server is disabled - it falls back to the DIR-655.
If I disable NTP SERVER and set the date and time manually,
1)The Year drop down does not have an entry for 2013. It has 2011, 2012, 2002, 2014.
2)If I select Copy Your Computer's Time Setting the Month, Day  Hour, Minute and Sec are correct but the Year is set to 2002.
3)If I enable NTP Server - I never get the time displayed correctly in the lower pane or in the log.
I reported these problems to DLINK a year and a half ago. They are non-responsive.

[KE2QR]

Sorry - please revise #3 below to the following;
3) When I select COPY YOUR COMPUTER's TIME SETTINGS the Year is not displayed correctly in the field below however when I hit save settings the correct time appears under TIME CONFIGURATION and in the LOG. However, when the system is rebooted - the time reverts to 12/31/1999 and the log is lost!
DLINK - Please, please, please fix this - make ENABLE NTP SERVER work!! I can live with the log coming up blank on a reboot (however I will never be able to see what caused the reboot) but at least make the ENABLE NTP SEVER work and the option live through a reboot (non volatile) so I can at least see when the DAP-1360 restarted!!!!

My DAP is configured in REPEATER Mode.
I have assigned a static IP Address
The DHCP Server is disabled - it falls back to the DIR-655.
If I disable NTP SERVER and set the date and time manually,
1)The Year drop down does not have an entry for 2013. It has 2011, 2012, 2002, 2014.
2)If I select Copy Your Computer's Time Setting the Month, Day  Hour, Minute and Sec are correct but the Year is set to 2002.
3)If I enable NTP Server - I never get the time displayed correctly in the lower pane or in the log.
I reported these problems to DLINK a year and a half ago. They are non-responsive.

[FurryNutz]

One question, with this one problem with time, is this effecting anything while using this DAP?

It's recommended that you phone contact DLink support, ask for level 2 or higher and see if they will help resolve this.

Honestly, looking back at the FW history of this Rev, has been about 3 years since the last update for Rev A. There has been 2 other Revs that have been released, B and C. I don't know if this issue will be addressed by FW since Rev A is fairly old and hasn't seen any since 2010.

I would recommend if you call, as and see if they can swap it out possibly for a Rev B or C or if they won't do anything, use it as is or find new newer AP that doesn't have this issue. I presume Rev As only have this issue.

I don't think theres going to be much help for old Rev As IMO.