Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Here>DIR-645 v1.03 FW Released

Let us know how it works for you.

[FurryNutz]

Verified that Mac OSX SharePort wont connect to a WD My BOOK 2Tb USB drive and trying to set a router IP address of 192.168.7.1 still fails however this version of FW comes from June 2012 and we didn't report this issue till Oct 2012 so hopefully next release of FW will address these 2 issues.
http://forums.dlink.com/index.php?topic=44116.msg189865#msg189865

However, I did find one problem, before I upgraded, I saved the last v1.02 configuration to file using OSX Safari. Factory reset the router, upgraded to v1.03, Factory reset the router again and tried to re-apply the v1.02 saved configuration file and received a notice that the file was not either compatible, corrupt or not meant for this particular model router and the upload would not be performed. So I'm having to manually set up the router from scratch again after v1.03 is applied to the router.  

[opfranci]

I found the same problem with the configuration file not being able to be uploaded.  I have started to set up the configuration manually but I wanted to see if there was a fix.

[FurryNutz]

Nothing ive see yet. You need to manually configure then resave the config to file once more. Only seems to be affected when using a prior saved version on v1.02 on a router w v1.03 on it.

[goslow2gofast]

I also had the same problem with the 1.03 firmware not accepting my saved config.bin file from right before the upgrade. I was coming from 1.01. I backed out to the 1.01 firmware and it reloaded the saved config.bin fine. Sounds like I will have to take some screen shots of my config and do the 1.03 upgrade the hard way...

~gs2gf

[thepaul]

I found a v1.03 FW version at ftp://ftp.dlink.com/Gateway/dir645/Firmware/ . Flashed it and it contains a non-standard preset Admin password. So, I am not able to log in and downgrade back. Factory reset doesn't work either. Does someone knows a way out of this?

Thanks!

[FurryNutz]

It's only recommended to use FW files officially posted on the main DLink we site.


Try this? FW Update Process
USE IE only!
Just send the v1.02 version instead.

It should down grade if you follow the factory reset, send file, factory reset once more process.

Was there a problem with what was previously loaded?

[thepaul]

Thanks!!! I have a working router again. There was no problem. I was just looking for a newer FW version, because here in Holland they only offer the v1.01 FW version. Again, thanks for the help

[FurryNutz]

Glad you go it working.

Come back and visit if you need any other help.

Enjoy.

[berzika]

I have a problem with my DIR-645. It changed my password when i trying to log in into it! It used to be like default! username:admin and password: (blank)

but now its sayning worng password

I uppgraded my firmware to 1,03

Help me pls

[FurryNutz]

What region are you located?
Was a factory reset performed both before and after the upgrading?
What browser are you using?
Try Opera or FF? If IE 8 or 9, set compatibility mode and test again.

How many characters are in your PW? Try 3 characters,> 123 for now and see what happens.

[berzika]

  Im from Sweden

And it was the browser! IE 

It works fine with another browser!

Thanks for the support and a quick answer 

/uffe

[FurryNutz]

What was the other browser it worked with?

[berzika]

I used the browser: GoogleChrome, on a Windows7 (64) based laptop and it works fine! No problem at all

Thanks again 

[FurryNutz]

Glad it's working, enjoy.

I used the browser: GoogleChrome, on a Windows7 (64) based laptop and it works fine! No problem at all

Thanks again