Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[EdwinM]

Hi D-Link forums. A few days ago I received my DIR-655 I ordered off Amazon and hooked it up. There were no problems the first day after initial setup. The next day I noticed that I was losing internet connection even though the wifi indicator on my laptop said otherwise. This happens for about 5 minutes at a time and on other devices such as my desktop and my iPad. And I hopped on Call of Duty last night and played a competition with some friends and gave everyone 4bar connection. Later that night, I was playing some more and people that connected to me received 1bar connection and I got that in return on their connection. I feel that the router isn't working with my devices right and I want to know if their are some settings I can change to fix the problem with my laptop and make my gaming experience better.

[FurryNutz]

Link>Welcome!

What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?

What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.

Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
Ensure devices are set to auto obtain an IP address.
If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules.
Turn off WISH, and WPS under Advanced.
WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
Set current Time Zone, Date and Time. Use an NTP Server feature. Tools/Time.
 
Links>Wireless Installation Considerations and Managing Signal Congestion
Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
What wireless modes are you using?
2.4Ghz Routers only: Try single mode G or N or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK  only or Auto.
What wireless devices do you have connected?
Any cordless house phones?
Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?
Try turning off Short GI, WLAN Partition,and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless.
Enable WMM Enable Under Advanced/Advanced Wireless.

Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.

Review this as it work well for XBL gaming:
Gaming and QoS for XBL

[EdwinM]

What Hardware version is your router? Revision B
Link>What Firmware version is currently loaded? 2.10NA
What region are you located? South Carolina

What ISP Service do you have? Cable or DSL? Time Warner Cable. Cable.
What ISP Modem Mfr. and model # do you have? Not sure.

[EdwinM]

I tried out all of your suggestions and set up QoS for my PS3. Just going to wait and see if I lose laptop signal again.

[FurryNutz]

There is a Gaming and Gamefuel for PS as well in that same forum if you need rules for PS.

Let us know what model modem you have and if any of the suggestions regarding Wireless help as well.

Good Luck.