Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

You could try this:
http://forums.dlink.com/index.php?topic=37018.0


Other posts about WOL maybe in the FAQ Library

Good Luck.

There's no WOL option? 

[DCIFRTHS]

Get it here:
http://forums.dlink.com/index.php?board=113.0

*Fixes Samsung Galaxy S4 problems.

Let us know how it works for you.

Has the UPnP vulnerability been fixed on the "A" version of this router? If so, as of what firmware was it fixed in?

[FurryNutz]

http://forums.dlink.com/index.php?topic=56871.0

Has the UPnP vulnerability been fixed on the "A" version of this router? If so, as of what firmware was it fixed in?

[sohlican]

Hi,
can the fix be implemented for A4 WW as well?  I am having the same exact issue with my 1.35WW DIR-655 router.

Thank you.

[FurryNutz]

Just load the v1.37 EU version. Please use the FW update process listed in the FAQ Library.

Hi,
can the fix be implemented for A4 WW as well?  I am having the same exact issue with my 1.35WW DIR-655 router.

Thank you.

[Longs]

Yah my GSY S4 is working again.. However my wife's iphone en ipad are having issues with this new fw..
Anybody else having the same??

I also seem to see some poor and intermittent connections on the IPAD and Iphone after updating my A4's firmware to this release.  I actually went back to 1.36 thinking that when they adjusted for Samsung that maybe they had caused an issue, but I seem to see this behavior with 1.36 too.  I updated from 1.33 because I was seeing some wireless restarts, figured it was worth a shot.

Is there a list of recommended settings for the DIR-655 that are stable, proven, least trouble-free, rather than just "for testing"?  I'be been using this router for 3+ years now and I don't like to "guess" when I tinker.

[FurryNutz]

Try this: Router Troubleshooting Suggestions and Tips

I also seem to see some poor and intermittent connections on the IPAD and Iphone after updating my A4's firmware to this release.  I actually went back to 1.36 thinking that when they adjusted for Samsung that maybe they had caused an issue, but I seem to see this behavior with 1.36 too.  I updated from 1.33 because I was seeing some wireless restarts, figured it was worth a shot.

Is there a list of recommended settings for the DIR-655 that are stable, proven, least trouble-free, rather than just "for testing"?  I'be been using this router for 3+ years now and I don't like to "guess" when I tinker.

[delinked222]

I have galaxy S2 and when I connect it to the wifi, after about 30 seconds the router drops the connection and all devices lose it too. No problems when connecting the laptop only.
Hardware: A4
Firmware: 1.37NA

My wifi settings have always been:
Channel Width: Auto
WPA Mode : Auto
Cipher Type: TKIP and AES

[FurryNutz]

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try WPA2 and TPIK only.
• Any 2.4Ghz or 5Ghz cordless house phones?
• Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?
• If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, HT 20/40 Co-exhistence and Extra Wireless Protection if you have it. Recommended settings are default. Under Advanced/Advanced Wireless.

Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
6" minimum safe distance between devices.

I have galaxy S2 and when I connect it to the wifi, after about 30 seconds the router drops the connection and all devices lose it too. No problems when connecting the laptop only.
Hardware: A4
Firmware: 1.37NA

My wifi settings have always been:
Channel Width: Auto
WPA Mode : Auto
Cipher Type: TKIP and AES

[New Age]

Quick question I'm using Ver 1.11 in a A3 Dir 655, has been working fine for some years, changed the Uverse modem last month and I'm having wireless connection problems with Ipad2, Iphone 4 and Galaxy S3.  The connection is on and off all day, started the trouble shooting, and one option is the firmware update, do you suggest moving to ver 1.37?

[delinked222]

Quick question I'm using Ver 1.11 in a A3 Dir 655, has been working fine for some years, changed the Uverse modem last month and I'm having wireless connection problems with Ipad2, Iphone 4 and Galaxy S3.  The connection is on and off all day, started the trouble shooting, and one option is the firmware update, do you suggest moving to ver 1.37?

You can try, but you'll get the same result. New firmware is **, no matter the settings you make in your router. Until new one comes out I don't use wifi on my cell phone.

[FurryNutz]

Does the uVerse modem have WiFi enabled on it at the same time as the 655? It's recommended to either disable the WiFi on the modem or ensure what you are using a different channel between the modem and 655 router. Placement of the modem and 655 router should be as far away from each other as possible.

I recommend keeping the current FW version on the 655 until you can identify what is wrong with your set up. Everything was working until you changed the modem out. FW upgrade may not resolve anything.


Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try WPA2 and TPIK only.
• Any 2.4Ghz or 5Ghz cordless house phones?
• Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?
• If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, HT 20/40 Co-exhistence and Extra Wireless Protection if you have it. Recommended settings are default. Under Advanced/Advanced Wireless.

Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
6" minimum safe distance between devices.

Quick question I'm using Ver 1.11 in a A3 Dir 655, has been working fine for some years, changed the Uverse modem last month and I'm having wireless connection problems with Ipad2, Iphone 4 and Galaxy S3.  The connection is on and off all day, started the trouble shooting, and one option is the firmware update, do you suggest moving to ver 1.37?

[FurryNutz]

As a WiFi upgrade suggestion if you wanted to keep the DIR-655 as the main host router, you could turn OFF the Wifi on the 655 and connect this:
http://forums.dlink.com/index.php?topic=50033.msg226061#msg226061

Or connect a DAP-1360, 1522, 1525, or 1533

You can try, but you'll get the same result. New firmware is **, no matter the settings you make in your router. Until new one comes out I don't use wifi on my cell phone.

[delinked222]

Thanks, but I switched back to version 1.35NA and put the same settings, works fine for now.

[FurryNutz]

Enjoy.