Topic: How to retrieve data when DNS 321 Nas enclosure is broken (Read 4464 times)

telesamad · « **on:** May 16, 2009, 01:12:57 PM »

Hi...what if the enclosure goes bad and you need to access your data? I tried taking the drive out and hooking up with a windows XP machine. I hoped it would recognize the drive as a foreign disk and i would be import that. Unfortunately looks like the file system is totally unknown to windows and it does not know how to handle it.

Whats your opinion? looks like I have to get another DNS-321 enclosure. How about if I get a DNS-323 and put the 2 drives from my dns-321 = will dns 323 recognize my drives?

Just a thought.
Thanks

mig · « **Reply #1 on:** May 16, 2009, 03:33:54 PM »

If you install an EXT2 file system driver for winXP (http://www.fs-driver.org/)
then you can access your DNS-321 disk.

ceyko · « **Reply #2 on:** May 17, 2009, 08:23:18 AM »

That's good to know actually. Thank you.

mig · « **Reply #3 on:** May 17, 2009, 12:36:09 PM »

Quote from: ceyko on May 17, 2009, 08:23:18 AM

That's good to know actually. Thank you.

Don't just take my word for it. As with any disaster recover plan, you should try
out this solution before a failure occurs, to verify this technique works for you,
in your environment. RAID level and OS patches could effect your success.

D-Link Forums

News:

Author Topic: How to retrieve data when DNS 321 Nas enclosure is broken (Read 4464 times)

telesamad

How to retrieve data when DNS 321 Nas enclosure is broken

mig

Re: How to retrieve data when DNS 321 Nas enclosure is broken

ceyko

Re: How to retrieve data when DNS 321 Nas enclosure is broken

mig

Re: How to retrieve data when DNS 321 Nas enclosure is broken