Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bigdave240]

when i got the dap-1320 i used my tablet to get to the setup and it worked fine. I could log in using the ip address but not the supplied name but that is ok. not a big deal. after testing it a bit i found that there was an update to 1.10 so i downloaded it and did the upgrade. The dap-1320 still worked after the upgrade but i could not get past the admin log in screen when using my tablet with chrome, opera, the standard browser or dolphin. I could get to it via my pc and it looked fine after the update. I tried setting a password but that doesn't work either. on the tablet i tried setting the agent to desktop, rebooting etc. when i enter the password it then does a dns search and cant find anything. very weird. Still like the thing but it would be better if it still was accessable from my tablet. but as long as it works i lilke it. really extended my network to the front of my house well.

[FurryNutz]

I would follow this and see if you can re-load the upgraded FW:
FW Update Process

Might try downgrading.

Let us know how it goes.

[bigdave240]

I rolled back to the 1.00 version and can now access it from my tablet, phone, other android devices. Curious about enhancements that are in 110 though. but if it works ok on this version i will probably leave it here. pretty neat little device. I ended up putting it in my garage on its own ssid so i can just switch to it when i am working in the garage. works all the way across the street at the neighbors house. very cool.

[FurryNutz]

Glad it's working for you. Enjoy.

[FurryNutz]

v1.10   7/17/2013
Release Notes:
Updated GUI
Enhanced Performance
   

[bigdave240]

Yup was wondering what the performance enhancements were but it seems to be fine as it is so still ok with it.

[FurryNutz]

 

[johnston21]

Wonder if it works with QRS mobile (Android or ios), or with the iPhone's stock browser. Anyone actually notice said performance improvements?

Update:
Well I can't successfully login via IE9 nor my mobile browsers. I get the login page, and it appears to be successful but then it cannot find the url: //xxx/index (with xxx being the name of your device).

I can login via QRS Mobile, but only limited settings are available to be changed.

The unit is working, and being that it retained my settings, I'm leaving it for now. When I'm ready to roll-back or update the firmware, I'll reset the unit so that it has no password in hopes of that getting me to the UI.

[FurryNutz]

Link>Welcome!

• What region are you located?

Also did you factory reset the DAP before the upgrade and do one more after the upgrade then setup from scratch?
What browser did you use to perform the upgrade?

Wonder if it works with QRS mobile (Android or ios), or with the iPhone's stock browser. Anyone actually notice said performance improvements?

Update:
Well I can't successfully login via IE9 nor my mobile browsers. I get the login page, and it appears to be successful but then it cannot find the url: //xxx/index (with xxx being the name of your device).

I can login via QRS Mobile, but only limited settings are available to be changed.

The unit is working, and being that it retained my settings, I'm leaving it for now. When I'm ready to roll-back or update the firmware, I'll reset the unit so that it has no password in hopes of that getting me to the UI.

[johnston21]

Canada, used IE9 to perform the upgrade, no I (purposely) didn't do a factory reset at all. I only took a backup (config_rpt) of v1.0 incase it wiped-out my settings.

Link>Welcome!

• What region are you located?

Also did you factory reset the DAP before the upgrade and do one more after the upgrade then setup from scratch?
What browser did you use to perform the upgrade?

[FurryNutz]

I recommend that you do a factory reset, re-send the FW update file, after that completes, do one more factory reset and then set it up from scratch and test again for this problem...

Keep us posted.

[johnston21]

Here's what I found:

Having reset the router (with v1.1 installed), from http://dlinkap1fe2.local (leaving the password field blank), when you select Login, the UI takes you to http://dlinkap/index.htm and fails, when it should be taking you to http://dlinkap1fe2.local/index.htm which when entered manually properly takes you to the new UI.

From the UI Index screen, this same issue affects all other UI screens, ie, Network, htm, Extwireless.htm, etc (noting that all other UI screens appear to be Case sensative requiring an upper-case for the 1'st character).

What's funny is that the default name is dlinkap

Anyway, I rolled-back to v1.0 and all is ok again.

 

[FurryNutz]

Ok, I'll pass this along to D-Link for there review. Hopefully they will see the problem and provide some info or fix it where needed.

[FurryNutz]

To the both of you, I have received word from D-Link that there is a beta build that they would like to offer to see if he helps with this issue. Please let me know if you are interested in testing please when you get time. I'm hoping this will fix this issue seen in v1.10.

Thank you for your patience.

[bigdave240]

sure i will try the beta release. just let me know when/where its available.