Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Xzomo]

Hi
 
Have an dilemma.
 
Short version: i want to allow ip telephon traffic in to a few selected ip adresses.
 
Long version  :
 
Replacing and old DIR-100 with a DIR-655 (hw B1).
The DIR-100 has a firewall rule list, the 655 don't.
 
Reference:
http://suporte.dlink.com.br/suporte/emuladores/DIR/DIR_100/Advance/adv_firewall.htm
http://support.dlink.com/emulators/dir655/133NA/Firewall.html
 
In the DIR-100 i have stated the following
 
inbound from external x.x.x.x - x.x.x.x on udp port xxxx - xxxx are open to talk to internal adresses 192.168.0.x - 192.168.0.x
 
How do i go about to do this on the DIR-655 ?
On the 655 i can create a Inbound filter for the external adresses, but portforwarding only handle one internal adress as target, not a range. And Virtual Server cant set a port range.
 
And i dont think im able to set serveral rules with the same ports, it will what i remember say that they already are in use.
 
Best regards
Michael


ps. maybe this should be moved to the European child forum since im located there.

[FurryNutz]

Use the DMZ under Firewall settings...

[Xzomo]

Thank you but its not an option to expose these devices totally. There must be a "best practice" way of doing this.

[FurryNutz]

Can try this and see if it works for you:
Gaming and QoS for XBL

Use the "OtherDevices" rule listed there...

[Xzomo]

Thank you, ill give that a try. It does though look like when you read the description text that it only priorities traffic and not opening ports.
Will see.

[FurryNutz]

If you have uPnP enabled it should if you set up QoS rules. Its was we use for xbox gaming.

[Xzomo]

Okey, thanks.
Will report when i tried.

[FurryNutz]

Any status on this?