Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[rexxvaldis]

Hi

My 320V2 had firmware version 1.00 when I bought it.
When I was first looking to upgrade my 320v2. I found a number of FW versions on the Dlink website. I downloaded v1.01b02
v1.02b07  (LINK_DNS320L(LW).1.02b07(3.07.0329.2013)(BETA).zip)
V1.03b04

I first tried to upgrade with the 1.03xx, but that did not work, the [Apply] button remained greyed out. I used both FF and Chrome got the same result.
I decided to upgrade to 1.01xx instead of 1.02xx and that was successful. There has bee no issues with the unit I have access to all my files, and everything looks OK.

I cannot say whether there has been any improvement, as I upgraded within 5 days of purchasing the unit and configuring it. I will run it with this firmware for a few weeks before the next upgrade.

As my upgrade worked going from 1.00xx to 1.01xx. Should the FW upgrade be done in sequence for it to work. On my next upgrade I will skip 1.02xx and go to 1.03xx to test that it works or not.

Q. have anyone upgrade the unit successfully from 1.00 to (1.02 or 1.03).?

[JavaLawyer]

Hi

My 320V2 had firmware version 1.00 when I bought it.
When I was first looking to upgrade my 320v2. I found a number of FW versions on the Dlink website. I downloaded v1.01b02
v1.02b07  (LINK_DNS320L(LW).1.02b07(3.07.0329.2013)(BETA).zip)
V1.03b04

I first tried to upgrade with the 1.03xx, but that did not work, the [Apply] button remained greyed out. I used both FF and Chrome got the same result.
I decided to upgrade to 1.01xx instead of 1.02xx and that was successful. There has bee no issues with the unit I have access to all my files, and everything looks OK.

I cannot say whether there has been any improvement, as I upgraded within 5 days of purchasing the unit and configuring it. I will run it with this firmware for a few weeks before the next upgrade.

As my upgrade worked going from 1.00xx to 1.01xx. Should the FW upgrade be done in sequence for it to work. On my next upgrade I will skip 1.02xx and go to 1.03xx to test that it works or not.

Q. have anyone upgrade the unit successfully from 1.00 to (1.02 or 1.03).?

What hardware version do you have? This thread refers to Hardware version "B" which has a different set of firmware files from version "A".  Please see the following thread: DNS ShareCenter - What Hardware Version is My ShareCenter?

[rexxvaldis]

Sorry mine is HardWare Version 'B2

[JavaLawyer]

Sorry mine is HardWare Version 'B2

To the best of my knowledge, firmware version v1.01b02 is the latest release for that hardware version, so you are already using the latest available version.

[rexxvaldis]

Does that mean the firmware ver1.02b07 and 1.03b04 is not for the revision B2 hardware

[JavaLawyer]

Does that mean the firmware ver1.02b07 and 1.03b04 is not for the revision B2 hardware

Yes.

DNS ShareCenter - Why Have Multiple Hardware Versions for the Same Model?

[hacktrix2006]

@javalawyer is there any new Firmware files for the B1 Rev DNS-320L ??

I am currently on 1.01 dated 07/02/2013.

Thanks in advance

[JavaLawyer]

@javalawyer is there any new Firmware files for the B1 Rev DNS-320L ??

I am currently on 1.01 dated 07/02/2013.

Thanks in advance

AFAIK you are using the most current version. I always post any new betas/releases on this board as they become available. 

[hacktrix2006]

thanks for your relpy.

[JavaLawyer]

thanks for your relpy.

 

[JavaLawyer]

My DNS320B2 loses its network connection when copying larger files via cifs ( windows 7 ) to it's hdd. The transfer just stops. And the DNS320 freezes. I'am not able to connect to it until i pull the power plug and cold start it. I already pull my hair. Large means above 8 gigs.

I split this topic off in a new post: DNS-320 Rev B - Copying Large Files from PC fails

[nuffel]

Upgraded DNS-320 Version B2 from Firmware 1.00 to 1.01. Copied one file of 2 GB from DNS-320 to Notebook with 60,3 MB/s. Copied same file from notebook to DNS-320 with 43,9 MB/s.
Use TP-Link TL-SG105 5-port Metal Gigabit Switch and Cat7 lan cable 10m.

Webmanagement with IE 11 is excellent now.
Even the "right-click-options" have been improved.

[robex]

Hello everybody,

I'm having trouble upgrading my dns320 hw:B2 firmware 1.0 . The apply button from the web interface is greyed out.
I tried upgrading from IE in win XP,7,8, chrome, firefox ...with same results, button greyed out.
I also tried upgrading to 1.01b02ww then to 1.02ww from http://tsd.dlink.com.tw/downloads2008detail.asp
I just cannot click de apply button.

Any suggestion?

PS: i wondering if i can upgrade from telnet with putty.
Anybody has the commands?

[robex]

Nevermind, got it working ...turns out you have to have a valid volume, because the firmware file copies itself to the hdd volume, and flashes from there...

BTW version 1.02 from 23.04.2014 out ...

[JavaLawyer]

D-Link released DNS-320 Rev B firmware v1.02. The link to download the firmware is located on the first post of the following thread: DNS-320 Rev B - Firmware v1.02 Comments & Observations