Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ap4000]

I am running 1.07. Using UPNP, Genre is only showing correctly with ID3V1 tags. If ID3V2 then it shows as other. Is this being fixed in 1.08?

Also, having different directories for different media files in the UPNP server would be a great thing to have.

Thanks

[snovotill]

When I create an account named "ftp" then the account is created successfully, but it does not show up in the list of accounts. If I try to create the account a second again I get error "account already exists". Perhaps the firmware should PREVENT users from creating any accounts named "ftp".

Do I need to re-load Factory Defaults in order to erase this "hidden" account?

[gunrunnerjohn]

Unless this is quite different, it's pretty standard to restrict account names that clash with system resource names.  Try creating a folder names CON or PRN with Windows, for instance.

[walletless]

Any chance the BT "Seed until ratio" bug is fixed.
http://forums.dlink.com/index.php?topic=7760.0
-and-
http://forums.dlink.com/index.php?topic=9988.0

[lamestllama]

Daylight saving dates are checked for consistency but only in a Northern hemisphere centric fashion. So here in the southern hemisphere putting in the 3rd of October as the starting date and the 3rd of April as a finishing date gives an error and the end result is I cannot set daylight saving. 

[snovotill]

Unless this is quite different, it's pretty standard to restrict account names that clash with system resource names.  Try creating a folder names CON or PRN with Windows, for instance.

And this is why I reported it as a bug. The firmware should not allow creation of a user accounts named "ftp", because it is impossible to delete the account after is has been created. The firmware already blocks the account names "root" and "admin", but it does not yet block the account "ftp".

[gunrunnerjohn]

That's different, I didn't realize it allowed the creation of the account.  I take back my comment.

[AKFubar]

Please see this post:  http://forums.dlink.com/index.php?topic=10072.0

[jolley]

Have you tried resetting the unit to defaults yet to see if .MTS was working? Make sure you also hit the refresh button to rescan your folders.

I have reset to defaults using the web interface and button on back, but still .MTS files do not show.

I have also updated to 1.08b09 which is available on the UK support site, reset to defaults again, no change.

If the .MTS files are renamed to anything else for example .MP4 or .M2TS they appear and play fine.

[jolley]

I notice the power management settings do not work since resetting to defaults, whatever I set them to the HDDs never spin down, which is a shame.

[gunrunnerjohn]

First off, did you reset to factory defaults and reconfigure after changing the firmware?  If not, do that first.

If that still doesn't do it, try this.

Turn off power management, save the results and restart the NAS. 

Next, set it to Auto (low/high) save the results and restart the NAS.

See if that doesn't solve the problem.

[chemi]

Enhancement request: Email alerts don't work with some SMTP servers like Yahoo.com or Terra.es which require plain authentication. By default, DNS-323 doesn't use "plain" option and it is not possible to setup it without "hacking" around in the Linux directly. Specific details here: http://forum.dsmg600.info/viewtopic.php?id=3563

My enhancement request is to add in the Web UI another combo asking for the specific authentication method: ‘plain’, ‘cram-md5’, ‘digest-md5’, ‘gssapi’, ‘external’, ‘login’, or ‘ntlm’.

Regards,

     Chemi.

[chemi]

Enhancement request: Please, let us define more than one rule per user at FTP Server configuration.
It is a common scenario define folders with different rights in different units for the same user.

Regards,

    Chemi.

[jolley]

First off, did you reset to factory defaults and reconfigure after changing the firmware?  If not, do that first.

If that still doesn't do it, try this.

Turn off power management, save the results and restart the NAS.  

Next, set it to Auto (low/high) save the results and restart the NAS.

See if that doesn't solve the problem.

Cheers for the reply, yes I reset to factory defaults after changing firmware then formatted then configured.

Have tried your suggestion, although I had no problem with the fan (unless I change the HDD hibernation to less than 1 hour, then for some reason it stays on high constantly!) the problem I have is the HDDs don't stop. I'm sure I had this issue a number of firmwares ago but it went away somehow...

I have since reset to defaults again and the power saving works, the HDDs hibernated after about 30 minutes - even though the default setting is 5 minutes. Changing the setting to my preferred 1 hour stops hibernation all together

I'm using 1.08b09 from the UK support site and A1 hardware.

[gunrunnerjohn]

I'm running 1.08b8 from the forum link, don't think I want UK software.

Don't know what else to suggest.  I have my hibernation set for 15 minutes and it seems to work.  I've also gone back to Auto (off/low/high), and it all seems to be working normally.