Topic: Has D-Link Been in contact with Ubicom? (Read 5553 times)

Chunk · « **on:** June 16, 2009, 09:43:27 PM »

There is I guess at this stage, rumor, floating around that the base code or something to do with the Ubicom IP5160 hardware is to blame, and that's why firmware after firmware are not resolving these router issues.

Anyone?

d01100100 · « **Reply #1 on:** June 17, 2009, 12:05:37 AM »

Interesting note on this. I disable Automatic Classification. Most of my internal traffic is easy to categorize, so less overhead for my router in my mind means better throughput for routing. I wonder if the StreamEngine is causing conflicts. I disable Dynamic Fragmentation. Every comment about XBox Live says they don't support it. I also set my QoS stratas at multiples of 32. Not sure if it helps since I have no knowledge of how the QoS engine works, but anything that alleviates the math involved for splicing my traffic can't hurt.

Fearreality · « **Reply #2 on:** June 17, 2009, 01:45:30 AM »

I did see an article where they were going to become wrt compliant....maybe they did break the base code to achieve that. D100 please keep us posted if that helps (even if it just helps a little).

Reinvented · « **Reply #3 on:** June 17, 2009, 10:12:51 AM »

That was for the 825, not the 4500, or 655 or any other.

Fearreality · « **Reply #4 on:** June 17, 2009, 10:45:27 AM »

I guess i should have looked harder. Seems it is por a whole new processor line. And there is a thread over in the dir-655 too http://forums.dlink.com/index.php?topic=5987.0

D-Link Forums

News:

Author Topic: Has D-Link Been in contact with Ubicom? (Read 5553 times)

Chunk

Has D-Link Been in contact with Ubicom?

d01100100

Re: Has D-Link Been in contact with Ubicom?

Fearreality

Re: Has D-Link Been in contact with Ubicom?

Reinvented

Re: Has D-Link Been in contact with Ubicom?

Fearreality

Re: Has D-Link Been in contact with Ubicom?