Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TOP_LOVE_666]

hi

why my router is flashing orange and green (orange>>green>>orange>>green) ??
is there something missing???
i have the latest firmware

[FurryNutz]

• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Which LED is flashing orange?

Refer to the user manual for LED operation:
1 Power LED A solid green light indicates a proper connection to the power supply. The light will be solid orange during boot-up and will blink green during the WPS process.

2 Internet LED A solid green light indicates a connection to the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet.

What do you have connected?

[TOP_LOVE_666]

the router and the  internet working but the router is flashing orange and green every 1 second all the time ;( 
why???
also i want to know how i know if my router is updating the streamboost ??

[FurryNutz]

What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?

Which LED is flashing orange? The power or Internet globe?

[TOP_LOVE_666]

What ISP Service do you have? Cable or DSL?
ISP Service :mobaily
i am using LTE (4G internet )

What ISP Modem Mfr. and model # do you have?
modem : huawei b593

Which LED is flashing orange? The power or Internet globe?

internet globe

[FurryNutz]

Maybe a detecting reduced signal on the line.

Seems like your ISP modem has a built in router already...

• If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
  Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on Router

Swap LAN cables between the router and modem?

What region are you located?
Looking at the history of yours posts, your not in the NA region. This router is not officially supported out side of the NA region. This router is specifically designed for the NA region ISP networks and may exhibit odd behaviors if used in other regions that can not be supported or resolved. Maybe why you are seeing this behavior.

I recommend that you return the router and get you something that is officially supported in your region:
http://www.dlinkmea.com/site/index.php/site/product_category/25/19/routers

Also be advised:
http://forums.dlink.com/index.php?topic=55110.0