Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[donpablito]

Hi,
I am using the DWR-116 with the firmware V1.04b02 (provided by the D-Link support Team).

Unfortunately I have a "connection stability" problem. Basically, after a certain period time (that is variable every time) the internet connection drops down even if the internet status visible from the routed "DEVICE - STATUS" is active.

The router seems to be “freeze” (seems that the LAN connection is not connected to the WAN).

A very good description of my situation is clearly mentioned in the forum thread:
http://forums.whirlpool.net.au/archive/2228803

Did you have some suggestion to solve the “freeze” issue? Did you suggest a USB extension cable or some specific settings?

My 4g usb modem is the ZTE MF821D (that is included in the compatibility list of the product)

Thank you
Regards
Paolo

[FurryNutz]

Link>Welcome!

• What region are you located?
• Are you wired or wireless connected to the router?
• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

FW Update Process

• Was the router working before any firmware updates?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
• What ISP Modem service link speeds UP and Down do you have?
• Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
• Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
• For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
• If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
  Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on Router

[FurryNutz]

Any status on this? 

[tarar.pk]

I'm using dwr-116(v1.04) with Huawei e8372 this device require Sim pin code first connection setting but when I 1st time connected after all power ON/OFF dlink Dwr 116 not connect auto OR again.im again make the connection and will work plz add the option who work properly and setting save only 1st time.
Tarar.pk6600@gmail.com
+923455866600

[FurryNutz]

I recommend that you phone contact your ISP support office and ask for help and information regarding this. If this unit was provided by the ISP, then it may have there own FW and support features which will need to be addressed directly with the ISP since it's there HW. We find that phone contact has better immediate results over using email.

I'm using dwr-116(v1.04) with Huawei e8372 this device require Sim pin code first connection setting but when I 1st time connected after all power ON/OFF dlink Dwr 116 not connect auto OR again.im again make the connection and will work plz add the option who work properly and setting save only 1st time.
Tarar.pk6600@gmail.com
+923455866600

[tarar.pk]

Dwr-116 with any firmware version not working with Huawei E8372h-153.but I'm purchase TP-LINK MR-3420 this modem very good working with all 4g lte devices.plz upgrade your firmware I am also using dwr 116 v1.05

[FurryNutz]

Thanks for sharing your information. Hope it helps future users as well.

Dwr-116 with any firmware version not working with Huawei E8372h-153.but I'm purchase TP-LINK MR-3420 this modem very good working with all 4g lte devices.plz upgrade your firmware I am also using dwr 116 v1.05

[syeed]

Hi,

Any place where I can download firmware version 1.05. searching for firm but dlink's europe site provide 1.03 b, 1.04 & 1.06 b versions..

[FurryNutz]

Link>Welcome!

• What region are you located?

Hi,

Any place where I can download firmware version 1.05. searching for firm but dlink's europe site provide 1.03 b, 1.04 & 1.06 b versions..