Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stefan4o]

Hello,
a friend of mine has a problem with his D-600 (rev.B). The problem is that the notebooks cannot achieve the N-standart 150mbps link-speed. Every time when I`ve check the status it says 65 or 72mbps (depends of the notebook). Both of them working great with an TP-Link 840N and status said 150mpbs (internet speed up to 70-80 mpbs). Pretty same notebooks couldn`t be as much as 72mpbs linked with D-Link (it says N-standart router on the label) - the internet speed is up to 37-38mbps (it is pretty normal for 72mbps linked with router). I`ve try to change a Chanel width from 20mhZ to Auto (20/40Mhz), but the same result - 72mbps/65 mbps. Is there any solution to fix this - it is pretty bad for N-router having only the half of announced "transfer". I`ve tried with 2.0x and 2.17 firmware - same result 72/65mbps. Any ideas? As I already read - dd-wrt could not fix this issue maybe...
Thanks in advance

[FurryNutz]

Link>Welcome!

• What region are you located?
• Has a Factory Reset been performed?
• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

>FW Update Process

Try single mode N, Auto channel width 20/40Mhz, Manual channel 11 or 13, and WPA2/AES only?

[stefan4o]

Hi,
Region - Bulgaria, Eastern Europe
About factory reset - yes, at least 2 or 3 times
Yes, I`ve tried before I update a firmware.

Try single mode N, Auto channel width 20/40Mhz, Manual channel 11 or 13, and WPA2/AES only?

I did all of this, except to change manually 11 or 13 channel. Is that means, that only this two performs 150mpbs? If so - that is ridiculous and completely non-sense 

[FurryNutz]

Try single mode N, Auto channel width 20/40Mhz, Manual channel 11 or 13, and WPA2/AES only?

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.