Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Arugal102]

From the past 1 month, i've been getting this weird gypsy problems.

Here's what's happening
I'm playing on a server, I get 150ms to that server, but randomly my ping just spikes up to 300 and more.
People are mad-complaining about me just teleporting across the map, I tried pinging my router, constant 1ms, I'm using wired just in case you do know.
I  tried pinging my ISP, 4-5 ms, but when I ping the server on cmd, I get 150 ms, then it says "Request timed out", What the heck.
Yes, I tried turning off DNS-Relay, it removed all of those ping spikes, but it increased my ping 2x, 280 ms is unplayable.
I've tried various times turning my router on and off, so as my modem and computer.

And NO, it's not from the server

...

[Arugal102]

My router is pretty high-end router.
I don't expect any problems from this router.

D-Link AC-1900...
I bought it 3 months ago.

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?
• Are you wired or wireless connected to the router?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
• What ISP Modem service link speeds UP and Down do you have?
• Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
• Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
• For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
• If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.
  
  
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
  • Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many? Use v3, its free.
  • If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, Extra Wireless Protection and HT 20/40 Co-existence if you have it. Also testing with HT20/40Mhz Co-existence enabled will impact results as well. I prefer to use this option OFF. Recommended settings are default. Under Advanced/Advanced Wireless.
  
  Router Placement
  Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
  3-6' feet minimum safe distance between devices.
  Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
  http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
  
  PC 3rd Party Security Software Configurations
  
  • Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
  • Turn off all devices accept for one wired LAN PC while testing.
  • Disable any downloading client software managers, i.e. Torrents or similar.

[Arugal102]

I'll respond to your post after like 2 hours, I just suddenly have to go outside.


But i'll respond, I promise

[FurryNutz]

Any status on this? 

[Arugal102]

I've aleeady fixed it, dw.
ty for help, and sorry for this really long response 

[FurryNutz]

Can you give details on what you did to fix it?