Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[angelo4chris]

I was looking around the forums for a possible solution but no luck. I have a DCS-2330L which I am not able to perform an upgrade from version 1.03 to 1.12. I have reset the camera and started setup wizard again but it has not worked. I tried manually uploading the FW in the GUI but every time i click on upload i get page cannot be displayed (IE) or a 500 error  in Firefox. I have other DCS cameras and ive updated them no problem. I contacted the technical support but they have no solution to this at the moment. If i try to upgrade from the Mydlink Page it only keeps loading and never finishes. Camea is wired to router.

[FurryNutz]

Link>Welcome!

• What Hardware version is your DCS? Look at the sticker behind or under the camera.
• Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
• What region are you located?

Are you directly wired to the camera with a LAN wired PC or is the camera LAN wire connected to the main host router? Besure you are LAN wired.

What Mfr and model is the main host router?
What wireless modes are you using?
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool: DHCP

PC 3rd Party Security Software Configurations

• Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.

[angelo4chris]

Hardware verison A1
And actually the correct version is Ver. 1.01
Im in the Eastern Region of the United States

Correct, I have tha camera wired to one of the LAN ports behind the router

Im on the 2.4 Ghz connection

yeah I have Norton Antivirus and i disabled and restarted my pc but still kept getting the error on the browsers every time i click upload in the GUI of the camera.

[FurryNutz]

Can you try loading the v1.02 version see here?
http://support.dlink.com/ProductInfo.aspx?m=DCS-2330L

[angelo4chris]

Still encountered the same issue
* Used IE and gave us : Page Cant be displayed the moment i clicked on upload
* Im on Windows 7 went to Run and typed : hh http:(IP of camera)
* was asked to for the camera log in and I conducted the same steps but no luck still got the same issue
- I just reset the camera again for 1 minute and added camera back to cloud but still does not let me update the version

[FurryNutz]

Do you have a different PC to test with?
What windows version are you using currently?
Besure any browser add-ons or security is disabled.

How about re-loading the same v1.03 version, will it take it?

[angelo4chris]

I tried on a Windows 7 and a Widows 10 with firewall and antivirus disabled
Different network and still no luck
tried on IE, Firefor and hh but no solution

Is it a defective camera?

[FurryNutz]

Ya if you've tried two different PCs and can't get it to accept any FW, it needs to be RMAd or replaced.
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

[angelo4chris]

thanks, the camera has been considered as faulty (RMA)

[FurryNutz]

Let us know how the replacement does. 

[FurryNutz]

Fountain Valley CA?

[ceglia]

thanks, the camera has been considered as faulty (RMA)

did you ever get a new camera?  if so, were you able to upgrade the firmware?  same exact issue as you.  camera has 1.01.06 firmware, trying to upgrade to 1.12.  thanks.

[ceglia]

got it to upgrade!  crazy.  i rebooted the camera (not sure that helped at all), then tried upgrading again through the web admin page (not mydlink).  it failed.  tried two more times, and the third time it just worked!  so maybe try rebooting the camera and then give it multiple tries??

now to see if the upgrade was worth it... good luck to all.

[RYAT3]

Ya if you've tried two different PCs and can't get it to accept any FW, it needs to be RMAd or replaced.
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

I bought the camera over a year ago.

[FurryNutz]

PC 3rd Party Security Software Configurations

• Turn off all anti virus and firewall programs on PC while upgrading FW.

PC Web Browser Configurations
What browser are you using?
Try IE FF? If IE 8, 9, 10 or 11, set compatibility mode and test again. These are recommended for doing any FW udpates.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.

got it to upgrade!  crazy.  i rebooted the camera (not sure that helped at all), then tried upgrading again through the web admin page (not mydlink).  it failed.  tried two more times, and the third time it just worked!  so maybe try rebooting the camera and then give it multiple tries??

now to see if the upgrade was worth it... good luck to all.