• November 01, 2024, 05:25:09 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Problems configuring Vlans in DWS-4026  (Read 3807 times)

Hereter

  • Level 1 Member
  • *
  • Posts: 2
Problems configuring Vlans in DWS-4026
« on: April 29, 2016, 01:13:56 PM »
Hello i have some issues triying to configure vlans in wireless switch DWS4026 this is the scenario, the network have a DHCP server (Mikrotik) it have an interface that go to the DWS4026 at port 24 with 2 vlans, vlan1 network 172.16.20.0 and vlan131 network 10.0.131.0, i have one dwl6600ap directly connected to DWS4026 port 22, have created the vlan 131 on Lan>L2Features>vlan configuration, since this guide ftp://files.dlink.com.au/products/DWS-4026/REV_A/SetupGuides/DWS-4026_-_BYOD_Captive_Portal_and_MAC_Authentication_Guide_v1.0.pdf I dont need the captive portal only the 2 ssid working with their respective vlans, i cant make it work, so, help is wellcome.-


Thaks.-
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Problems configuring Vlans in DWS-4026
« Reply #1 on: April 29, 2016, 02:38:25 PM »
Link>Welcome!

  • What region are you located?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Hereter

  • Level 1 Member
  • *
  • Posts: 2
Re: Problems configuring Vlans in DWS-4026
« Reply #2 on: May 01, 2016, 12:19:21 PM »
Im in Argentina, South America.-
Logged

PacketTracer

  • Level 4 Member
  • ****
  • Posts: 441
Re: Problems configuring Vlans in DWS-4026
« Reply #3 on: May 03, 2016, 12:12:34 PM »
Hi,

according to your region I refer to this manual. You didn't explain how you want to use your AP dwl6600ap. Hence I assume, you want to assign it two SSIDs, one for VLAN 1 and one for VLAN 131? If so you have to configure port 22 of your DWS-4026 for both VLANs, as you have to do for port 24, which connects to your Mikrotik DHCP server.

Second you didn't tell, how you want VLAN 1 to be handled by your AP and Mikrotik devices: Shall frames belonging to VLAN 1 be transmitted tagged or untagged? In general, for ports/devices configured for several VLANs, frames have to be tagged for all VLANs with the exception of at most one VLAN which you may configure to transmit frames untagged. I guess you started from defaults and hence want to transmit frames untagged for VLAN 1. So frames belonging to VLAN 131 have to be tagged.

Please check if the following configuration will work:

  • Click LAN > L2 Features > VLAN > Configuration
  • Check if ports 22 and 24 are included/untagged for VLAN 1. This should be the case per default.
  • Create VLAN 131, optionally give it a Name, and configure ports 22 and 24 to be included/tagged. All other ports should be excluded.

The attached devices (AP and Mikrotik) have to be configured accordingly: Transmit tagged frames for VLAN 131 and untagged frames for VLAN 1.

PT
Logged