Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Get it here:
http://forums.dlink.com/index.php?topic=65787.0

Let us know how it works for you...

[Peaty]

 I only see FW V1.12B10 at the link. Installed and seems to be working fine, no issues though. Thanks for the heads up.

[FurryNutz]

My bad. Typo. 

[Peaty]

My bad. Typo. 

I was wondering but I'm not one to throw stones when it comes to typos

One comment on the new firmware.  In the QoS section, there is now a drop down to select between optimizing between either devices, Apps or nothing.    I didn't notice the drop down at first and it defaulted to the App view.  It took me a second to realize there is now a drop down but all my devices were still set up the way they were prior to the firmware update.

[FurryNutz]

Ya there a new drop down feature which first appeared on the 890L a few months back which I was told was going to be seen on the 89x series:
"New Features and Improvements seen:
I see that the UI of the QoS section has changed. Two modes of operation now, by Device or by Application. Also Detect ISP speed test. Seems to work. Found 98 and 3 of my 100 and 3 spec.

Also when Application is enabled, there is bandwidth gauges on each device you select in the Clients list."
http://forums.dlink.com/index.php?topic=61825.msg272849#msg272849
Do you see any bandwidth gauges on the clients list?
Did you do a full factory reset then load FW, then factory reset then set up from scratch?
What browser are you using?

[Peaty]

I did not do a full reset, I use powerline network adapters and they are pretty finicky to get working properly. Everything is working just so and I don't want to risk not being able to watch my movies on my WD-TV from my NAS drive. I did not see the bandwidth indicators I will have to take a look.

I'm using FF most of the time, sometimes Chrome.

Pete

[FurryNutz]

Ok. Let us know what you see on the Client list and such.

If it's working then run it for a while and see how it goes.

[Peaty]

I took a look at the client list. I can see the traffic speeds but on all of the ones I've reviewed it says 0 up and down.  I know that's not accurate but not really a big deal to me, everything else seems to be working just fine.

[FurryNutz]

Might have a look with a device that you know uses some bandwidth, do some streaming or a down load or something then watch the gauge. If you don't notice anything, Let us know. Glad it's working well otherwise.

[Evgenovich]

Just downloaded the new firmware.  Is there a bulletin on bugs fixed? 

[FurryNutz]

Information should be in the linked FAQ...

[Evgenovich]

Thanks for the reply.  Still have the issue though where I can't assign names or IP addresses beyond ~25 devices.  "The maximum number of DHCP reservations has been exceeded."  Also, in the wireless settings, it ignores the manual channel selection.  I have channels 4, 48, and 161 selected (to avoid neighbors and also another router in the house) but it is broadcasting on 6, 42, and 155 (according to the app WiFiAnalyzer).  No matter what channels I select on 5GHz it always broadcasts on 42 and 155.  Even in SmartConnect mode it picks those channels on 5GHz. 

[FurryNutz]

D-Link router are limited to 24 reservations. Names should be editable though.
What browser are you using to edit the names and reservations?

What app are you using to determine channels being used?

Thanks for the reply.  Still have the issue though where I can't assign names or IP addresses beyond ~25 devices.  Also, in the wireless settings, it ignores the manual channel selection.  I have channels 4, 48, and 161 selected (to avoid neighbors and also another router in the house) but it is broadcasting on 6, 42, and 155.  No matter what channels I select on 5GHz it always broadcasts on 42 and 155.  Even in SmartConnect mode it picks those channels on 5GHz.

[Evgenovich]

Chrome and WiFiAnalyzer.  I get the error message even when I try to edit names beyond ~25:  "The maximum number of DHCP reservations has been exceeded."

[FurryNutz]

Can you post a capture of the wifi settings our using while SC is disabled and also post your wireless scanner app results as well?

 Adding Screenshots In A Post

Also can you confirm for us that you installed the v1.12 B10 from Nov 10th file and not the file from October?