Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[fzappa]

Got a good price on a new unit and it seems to have the features I wanted. I have it set up and runs fine.
The one questions so far is, to access remotely, I have DDNS configured in my DIR-655, do I need that also in the camera? I wouldn't think so, but since testing requires being away on an outside network wanted to minimize any mistakes beforehand.
In the router, I have a TCP port forwarded to the LAN Ip of the camera. Is that all that's needed? On my other camera, not a DLink, that works.
Thanks ahead of time.

[RYAT3]

In the router, I have a TCP port forwarded to the LAN Ip of the camera. Is that all that's needed? On my other camera, not a DLink, that works.
Thanks ahead of time.

Sounds right.  You should be able to test this at home with your external ip address/port.

[fzappa]

Had someone test from their home and it works.  The other thing I'm wondering about doing is having the emailed motion activated notice be sent to two inboxes, my wife's and mine. Do you suppose two addresses can be entered?

[RYAT3]

Had someone test from their home and it works.  The other thing I'm wondering about doing is having the emailed motion activated notice be sent to two inboxes, my wife's and mine. Do you suppose two addresses can be entered?

Very unlikely, but if it was to work, use a semicolon between?  email1@email.com;email2@email.com

Forwarding email from email1@email.com to email2@email.com might work, depending on provider.  I haven't played with that, but it should leave a copy in email1.

Good luck.
 

[fzappa]

Using the semi colon worked. Thanks for that, good guess. Someone may want to store that info somewhere for others.

[fzappa]

It doesn't look like I can set the motion detection times differently my day, for example, start on Saturday at Noon, through Midnight, end on Wednesday at 0800. As far as I can figure it can only be active or inactive for the same period each day enabled.

[fzappa]

I guess not.

[RYAT3]

It would be in the f/w webpages if it was possible. Anything at mydlink.Com ? (I haven't looked there on years )

[fzappa]

FW pages? I know where to set active motion detection times, just that the hours have to be the same for every day that's enabled.

[fzappa]

And while I'm wishing, how can I get the web plug in for a browser? First time I accessed the camera with Firefox it popped up, same with IE. I'm using Pale Moon now which can utilize many FF plug ins, but accessing the camera doesn't prompt for plug in download.

[FurryNutz]

You'll need to use IE11 or FF for plug-ins for this camera. I also use PaleMoon however D-Link doesn't support this browser. 

[fzappa]

Been away from home for a few weeks and have had to log in and shut this camera down. I get false alarms almost daily, and both times our neighbor came over I got no alarm. I assumed it was responding to changing light, so tried adjusting sensitivity, but when we were texted that the neighbor had come over to water houseplants she walked in, around and out without triggering an email or video.
Is this camera just poor at doing this or is there some tricks to setting it up?

[fzappa]

Nothing, huh? Too late to return it......

[FurryNutz]

I'd contact D-Link support and ask for help and info. Possible just a bad unit. Ask for an RMA?

[fzappa]

Thanks, just did that via email, as first attempt. I'll call if no response soon. Strabge wording in instructions fir certain. Tried to understand the sensitivity percent setting. One model says to increase the number for more sensitivity whereas another says to set it for what percentage of the alert field needs to be dusturbed, so a smaller number would be more sensitive.
I'm wanting to avoid mydlink, preferring to access directly and use a third party ftp storage site. The problem with that is I have to be wary of too many megs of files going there. I had 28 false alerts last week, in one day. All showed no activity.