• February 22, 2025, 10:51:07 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Port Forwarding and Virtual Server resets itself.  (Read 5689 times)

subans

  • Level 1 Member
  • *
  • Posts: 1
Port Forwarding and Virtual Server resets itself.
« on: August 16, 2009, 09:43:17 AM »
Hi there, the problem I'm having is bit crazy..  ???

My Router is Dir - 625. Current firmware is 3.06. with typical router settings with WPA/WPA2 wireless.

My problem is: when I setup Virtual Server, the setting stays on for awhile. then router resets itself and I lose all the virtual server settings. all other settings are intact.

When I do port forwarding, router says I need to reboot and when I do that I lose the setting immediately. when I go back and check the settings I don't see any changes I made in Port Forwarding. all 24 of them are empty.

My ISP is Rogers (Canada) if that helps.

Thank you!!
Logged

Wand

  • Level 2 Member
  • **
  • Posts: 25
Re: Port Forwarding and Virtual Server resets itself.
« Reply #1 on: November 12, 2009, 03:43:05 PM »
There are two firmware revisions since 3.06, they are 3.07 and 3.08.  Reading on this forum 3.08 may be suspect.  I ran 3.07 fine for awhile, someone said 3.06 was the most stable.  Take your pick and let us know what happens.
Logged
Multiple PCs and Servers.  Support other installations.  Have used D-Link Products since 1986.

DarrelH

  • Level 1 Member
  • *
  • Posts: 1
Re: Port Forwarding and Virtual Server resets itself.
« Reply #2 on: December 27, 2009, 04:07:35 PM »
Had the same problem.  That, along with the Securespot hijacking is why I asked for a replacement.  I'll go hook up the old one to see what rev it is, but I'm pretty sure I ran against to two more recent revs.
Logged

bangerboy

  • Level 1 Member
  • *
  • Posts: 1
Re: Port Forwarding and Virtual Server resets itself.
« Reply #3 on: December 27, 2009, 05:10:55 PM »
I am having the same issue myself Dir 625 version C Firmware is @ 3.06 I save settings and few days later it looses the portforwarding and the virtual. You are certain that 3.07 or 3.08 will solve this issue..
TiA
Logged