Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Choppini]

I have a DCS-932L, it is doing it's job for years now, including the D-ViewCam program. Now I got a used DCS-5030L, everything is working fine, bit I can not add it into the D-ViewCam to manage both of them there. The model# DCS-5030L does not exist. It shows DCS-3710 and the next one is DCS-5220Ax. I know the 5030 came out long after the 932, Device Pack Version 1.3.0 - Is there an update? Anyone can help? Thanks

[FurryNutz]

Link>Welcome!

• What Hardware version is your DCS? Look at the sticker behind or under the camera.
• Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
• What region are you located?

What version of DVC are you currently using?

There are upgrades for DVC:
http://forums.dlink.com/index.php?board=156

[Choppini]

Thanks for your response, F.N.

The H/W version of the DCS-932L is A1, the F/W version (written on the box) is 1.01. 
File version 3.1.1 (D-ViewCam application=product version 3.11-0720) file version 3.1.1.0

H/W version of the used purchased DCS-5030L is also A1. (F/W ver: 1.01, which I don;t have)

I am located in Canada/WestCoast
Any more infos required? I really like the DCS-L5030.

[Choppini]

I am not sure why, but I was reading through the forum, went through almost all of the "supported camera lists" for most of the newer 'device packs' and I could not find the DCS-5030L... not at all. hm. Guess I have to abandon D-Link, had a look at the iSpy, but it is pretty sluggy. Any other recommendations? Too bad, that d-viewcam is just what I want

[FurryNutz]

Try the newer version of DVC?

[Choppini]

well...I tried updating, with different versions..... it goes through, but when I want to start the main console, a message appears that the version is a newer one, first I have to install something like 1.1 or so...
I uninstalled dvc... installed a complete new version, same thing, uninstalled. installed another "older" newer version. Cant get in anymore.
I scraped now again everthing 'newer' of dvc off and installed from the original cd of the DCS-932L again, and I'm in again..... just with the DCS-932. the DCS-5030 won't be recognized.
The 5030 works on ip and on 2 different devices on my-d-link lite (android cell and tablet). I wasted enough time with d-link within the past few days, I'm going to look into other programs. Thanks, I'm done with 'trying'

[FurryNutz]

Good Luck. 

[Red90]

Yep.  It is not in the device list.  WTH Dlink?

[Red90]

I used the DCS-6045L.  It seems the closest to the right specs and seems to work.

[FurryNutz]

If the camera is not in the supported camera list, then you can use a compatible model:
http://forums.dlink.com/index.php?topic=66899.0

I used the DCS-6045L.  It seems the closest to the right specs and seems to work.

[Red90]

I used the DCS-6045L.  It seems the closest to the right specs and seems to work.

With the new firmware, this no longer works.  Anyone find a way to get it working?

[kkmaster]

I used the DCS-6045L.  It seems the closest to the right specs and seems to work.

With the new firmware, this no longer works.  Anyone find a way to get it working?

I have same problem , a lot of camera can't connect to DVC.