• May 25, 2025, 10:40:57 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-655 ssh access  (Read 8842 times)

DFieri123

  • Level 1 Member
  • *
  • Posts: 3
DIR-655 ssh access
« on: August 22, 2009, 09:06:50 PM »
Working with the DIR-655 on a Verizon FIOS 15/5 connection. I cannot get the system to recognize the open port 22 pointing to my Linux server. For that matter I can't even get the remote administration of the router no matter which setting I use. http/https ports 8181 or 443 etc...

Anyone gotta clue?
Logged

Demonized

  • Level 4 Member
  • ****
  • Posts: 421
Re: DIR-655 ssh access
« Reply #1 on: August 23, 2009, 02:14:00 AM »
More info needed. Firmware version, modem configurable or not etc
Logged

DFieri123

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-655 ssh access
« Reply #2 on: August 23, 2009, 10:42:57 AM »
DIR-655 Firmware v1.32NA directly connected to Verizon FIOS ONT via Ethernet Cable
Tried Virtual Server to port 22 no access
Opened port 22 pointing to IP of Linux server no access
I went to the GRC.com site and tried testing for open ports under these parameters
and everything shows stealth mode.
I also open a port to an IP controlled power strip. Didn't work either.
With the original Actiontec modem/router no problems with SSH or Power Strip.
I have enabled and disabled most everything I could under each setting.
Logged

alessiocesar

  • Level 1 Member
  • *
  • Posts: 11
Re: DIR-655 ssh access
« Reply #3 on: August 24, 2009, 06:21:22 AM »
Quote from: DFieri123 on August 23, 2009, 10:42:57 AM
DIR-655 Firmware v1.32NA directly connected to Verizon FIOS ONT via Ethernet Cable
Tried Virtual Server to port 22 no access
Opened port 22 pointing to IP of Linux server no access
I went to the GRC.com site and tried testing for open ports under these parameters
and everything shows stealth mode.
I also open a port to an IP controlled power strip. Didn't work either.
With the original Actiontec modem/router no problems with SSH or Power Strip.
I have enabled and disabled most everything I could under each setting.


Try port forwarding instead of virtual server...Had the same problem with ssh into my linux box and all works now.


Cheers!
« Last Edit: August 24, 2009, 06:25:25 AM by alessiocesar »
Logged

DFieri123

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-655 ssh access
« Reply #4 on: August 25, 2009, 07:40:33 PM »
Okay, It was an interesting trip...I have multiple routers. I gave this one an address of 192.168.1.140 even though it was the first one off the FIOS ONT. Once I set it back to 192.168.1.1 everything works as designed...

Thanks!
Logged