D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: JavaLawyer on July 05, 2014, 07:33:48 PM
-
D-Link posted DNS-320 firmware version 2.05b08, which can be downloaded here: DNS-320 - Firmware v2.05b08 Download (http://pmdap.dlink.com.tw/PMD/GetAgileFile?itemNumber=FIR1400371&fileName=DNS-320_A2_FW_2.05b08(2.13.0507.2014).zip&fileSize=3.5335097E7;).
- DNS-320 - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=42483.0)
- DNS ShareCenter - How to Upgrade ShareCenter Firmware (http://forums.dlink.com/index.php?topic=49100.0)
- DNS ShareCenter - Important Posts & Information (http://forums.dlink.com/index.php?topic=58137.0)
- DNS ShareCenter - Beta Firmware Terms and Conditions (http://forums.dlink.com/index.php?topic=58285.0)
Please post your comments and observations as a reply to this thread.
:) ;) :)
-
As of this posting, D-Link has not yet published release notes for this latest firmware.
-
Could I suggest that you RENAME the subject the file is v2.05b08, your posting it as 1.05b08
-
Could I suggest that you RENAME the subject the file is v2.05b08, your posting it as 1.05b08
Good catch! I updated the subject in all the replies. . . ;)
-
So far, so good. Release notes would be welcomed, though :-\
-
Thank you, at least i can connect to my DNS320 to play mp4 video from my Samsung link of 40" TV (model:UA40ES6700), but not mkv video.
-
So far, so good. Release notes would be welcomed, though :-\
Will post as soon as I get hold of something. . . ;)
-
canīt enter P2P download after upgrading to this firmware :(
-
Not a big issue but after installing my dlink reverted to GMT Greenwich mean time and thus was an hour behind uk time until I changed to GMT Dublin, Edinburgh, Lisbon, London now it's correct.
-
The DNLA server is broken, it comes up with different folders not the folder you specify.
-
Is this fw compatible with DNS-320LW (A2)? Because I cannot find relevant topic.
-
Couple more issues -
FTP has been enabled on all my shares - previously disabled.
Shares - following a reboot all my shares vanished. They were all there with permissions but not browsable or accessible until I edited the shares and clicked next next etc and applied.
Printing. Printing has broken and I can no longer see the lp folder or print. the printer is under devices and this previously worked. I have rebooted (hence the share loss..) and also disconnected etc. I would love to roll back as i need a printer however i cant it wont let me so that could be a bug as well !!
-
Downgraded to 2.04b02
Fed up with this new one.
Printer works fine.
Lose my shares when reboot (every time) and as previously mentioned the only way to recover (every time) is to go through the set up process.....just next, next etc...
Lose my DLNA shares. And occasionally when they come back only lists a small portion of them.....
Not impressed!! But I guess thats what I get for using a Beta!
::)
-
How did you roll back? Mine fails everytime I try and use the older firmware.
-
How did you roll back? Mine fails everytime I try and use the older firmware.
Hi, I just used the "Firmware Upgrade" button. It worked for me (kinda glad) and everything is back to the way it was - working!
Sorry but I wont upgrade again in case it doesn't let me downgrade again!
;)
-
So far, I noticed the following changes:
- Ajaxplorer apps not longer accessible to all user
- Samba daemon upgraded to v3.5.15 from v3.5.6
- PHP upgraded to v5.2.17 from v5.2.10
- No version change detected in mdadm (Raid) or p2p server
- Possible upgrade in upnp (AV Media) as file is dated 2014-05-07, ver# still remain at 2.03.0100
-
Seem like there are speed improvement in both read/write test over the previous firmware. Results are not conclusive as the test on 2.03b03 was done early in Jan 2014 and there was a change in router after that.
(http://i60.tinypic.com/2urw8iq.jpg) (http://i59.tinypic.com/xdino9.png)
Volume 1 & 2 using firmware 2.03b03
(http://i61.tinypic.com/2nta2c3.png) (http://i62.tinypic.com/2evq884.png)
Volume 1 & 2 using firmware 2.05b08
-
I have just installed this on my NAS and can confirm the speeds have increased using the same hardware.
I used CrystalDiskMark to bench both volumes over my gigabit LAN which my Synology happily saturates.
Volume 1 is a very old 250GB Western Digital SATA1
Volume 2 is a old 320GB Western Digital SATA2
As you can see the newer firmware increases the speeds by a fair margin.
http://imgur.com/a/BhtNy
-
canīt enter P2P download after upgrading to this firmware :(
Nor me :(
-
Encountered no issue with P2P apps.
-
So far, I noticed the following changes:
- Ajaxplorer apps not longer accessible to all user
- Samba daemon upgraded to v3.5.15 from v3.5.6
- PHP upgraded to v5.2.17 from v5.2.10
- No version change detected in mdadm (Raid) or p2p server
- Possible upgrade in upnp (AV Media) as file is dated 2014-05-07, ver# still remain at 2.03.0100
Hello friends.
This version supports the add-on apps ?
Such as DNS 320L latest firmware ?
Thanks from Brazil.
-
Hello friends.
This version supports the add-on apps ?
Such as DNS 320L latest firmware ?
Thanks from Brazil.
All the while, this model doesn't support add-on apps and IMO is unlikely to be supported in future firmware.
-
Not sure if this has been reported before. It seem like starting from firmware 2.03 onward, the present of HDD is require otherwise the upgrading process will simply stuck at 0%. This also apply to downgrading as well.
If memory serve me well, from firmware version 1.0 to 2.02, firmware upgrading/downgrading will work fine without the present of any HDD.
-
Hello ,
i am using DNS-320 with newly updated v 2.05b08 since 2012 . i found this very useful , kindly add MAC ADDRESS Authentication also !
because i am failed to block some users , they can Access with other users Password and user name .
Keep It Up and cheers .
Thanks
-
D-Link posted DNS-320 firmware version 2.05b08, which can be downloaded here: DNS-320 - Firmware v2.05b08 Download (http://pmdap.dlink.com.tw/PMD/GetAgileFile?itemNumber=FIR1400371&fileName=DNS-320_A2_FW_2.05b08(2.13.0507.2014).zip&fileSize=3.5335097E7;).
- DNS-320 - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=42483.0)
- DNS ShareCenter - How to Upgrade ShareCenter Firmware (http://forums.dlink.com/index.php?topic=49100.0)
- DNS ShareCenter - Important Posts & Information (http://forums.dlink.com/index.php?topic=58137.0)
- DNS ShareCenter - Beta Firmware Terms and Conditions (http://forums.dlink.com/index.php?topic=58285.0)
Please post your comments and observations as a reply to this thread.
:) ;) :)
Hi,
The Rev A. 2.05b08 fixed the slow download speed, but Outlook 2007 can't open my pst files from Volume_1 and Volume_2.
With 2.03, it worked. I get 0x800703EE error when I try to open pst files. I tried several folders, but It wasn't successful. From my PC it works well.
I see numbered user on some directory security tab (not on all directory) : Unix user\1001 (I think it is the linux user/nobody user) and Unix group\502 (maybe allaccount?).
But all of these users (everybody, linux user/1001) and group nobody/502 hasn't any right.
Win7 X64 SP1, Outlook 2007.
BR, Zsolt
-
Not sure if this has been reported before. It seem like starting from firmware 2.03 onward, the present of HDD is require otherwise the upgrading process will simply stuck at 0%. This also apply to downgrading as well.
If memory serve me well, from firmware version 1.0 to 2.02, firmware upgrading/downgrading will work fine without the present of any HDD.
Thanks. This got me until I read this.
-
FYI:
http://forums.dlink.com/index.php?topic=56542.msg255169#msg255169 (http://forums.dlink.com/index.php?topic=56542.msg255169#msg255169)
-
Hi, updated to 2.05 again (taken from the official d-link support site). Its prob the same file but it works this time.
I now have a 5TB Toshiba HDD installed - MD04ACA500.
2nd drive is Hitachi 2TB - HDS723020BLA642
And a USB share - ANother 2TB drive.
All working well, however a few issues noticed;
USB Backups. No matter how I set this up it does not back anything up. NAS>USB nor USB>NAS.
Haven't seen the network connection as being any faster at all.
Same speed wired or wireless - About 5M/s
Any hints/tips appreciated.
;)
-
You installed v2.05b08 twice and it get working fine?
Maybe could be a profile/configuration problem.
Btw, this device is stuck in v2.05b08 right? :(
No news?