Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[albert]

So far, I noticed the following changes:

- Ajaxplorer apps not longer accessible to all user
- Samba daemon upgraded to v3.5.15 from v3.5.6
- PHP upgraded to v5.2.17 from v5.2.10
- No version change detected in mdadm (Raid) or p2p server
- Possible upgrade in upnp (AV Media) as file is dated 2014-05-07, ver# still remain at 2.03.0100

[albert]

Seem like there are speed improvement in both read/write test over the previous firmware. Results are not conclusive as the test on 2.03b03 was done early in Jan 2014 and there was a change in router after that.


Volume 1 & 2 using firmware 2.03b03


Volume 1 & 2 using firmware 2.05b08

[Dr_Frankenstein]

I have just installed this on my NAS and can confirm the speeds have increased using the same hardware.

I used CrystalDiskMark to bench both volumes over my gigabit LAN which my Synology happily saturates.

Volume 1 is a very old 250GB Western Digital SATA1
Volume 2 is a old 320GB Western Digital SATA2

As you can see the newer firmware increases the speeds by a fair margin.

http://imgur.com/a/BhtNy

[littlesheepy]

canīt enter P2P download after upgrading to this firmware

Nor me

[albert]

Encountered no issue with P2P apps.

[j-marcelo]

So far, I noticed the following changes:

- Ajaxplorer apps not longer accessible to all user
- Samba daemon upgraded to v3.5.15 from v3.5.6
- PHP upgraded to v5.2.17 from v5.2.10
- No version change detected in mdadm (Raid) or p2p server
- Possible upgrade in upnp (AV Media) as file is dated 2014-05-07, ver# still remain at 2.03.0100

Hello friends.

This version supports the add-on apps ?
Such as DNS 320L latest firmware ?

Thanks from Brazil.

[albert]

Hello friends.

This version supports the add-on apps ?
Such as DNS 320L latest firmware ?

Thanks from Brazil.

All the while, this model doesn't support add-on apps and IMO is unlikely to be supported in future firmware.

[albert]

Not sure if this has been reported before. It seem like starting from firmware 2.03 onward, the present of HDD is require otherwise the upgrading process will simply stuck at 0%. This also apply to downgrading as well.

If memory serve me well, from firmware version 1.0 to 2.02, firmware upgrading/downgrading will work fine without the present of any HDD.

[afreedi]

Hello ,
i am using DNS-320 with newly updated v 2.05b08 since 2012 . i found this very useful , kindly add MAC ADDRESS Authentication also !
because i am failed to block some users , they can Access with other users Password and user name .
Keep It Up and cheers .
Thanks

[josh_]

D-Link posted DNS-320 firmware version 2.05b08, which can be downloaded here: DNS-320  - Firmware v2.05b08 Download.

• DNS-320 - Cumulative Firmware Release Notes
  
• DNS ShareCenter - How to Upgrade ShareCenter Firmware
  
• DNS ShareCenter - Important Posts & Information
  
• DNS ShareCenter - Beta Firmware Terms and Conditions
  
  

Please post your comments and observations as a reply to this thread.

    

Hi,

The Rev A. 2.05b08 fixed the slow download speed, but Outlook 2007 can't open my pst files from Volume_1 and Volume_2.
With 2.03, it worked. I get 0x800703EE error when I try to open pst files. I tried several folders, but It wasn't successful. From my PC it works well.

I see numbered user on some directory security tab (not on all directory) : Unix user\1001 (I think it is the linux user/nobody user) and Unix group\502 (maybe allaccount?).
But all of these users (everybody, linux user/1001) and group nobody/502 hasn't any right.

Win7 X64 SP1, Outlook 2007.

BR, Zsolt

[screech]

Not sure if this has been reported before. It seem like starting from firmware 2.03 onward, the present of HDD is require otherwise the upgrading process will simply stuck at 0%. This also apply to downgrading as well.

If memory serve me well, from firmware version 1.0 to 2.02, firmware upgrading/downgrading will work fine without the present of any HDD.

Thanks. This got me until I read this.

[FurryNutz]

FYI:
http://forums.dlink.com/index.php?topic=56542.msg255169#msg255169

[gb99702]

Hi, updated to 2.05 again (taken from the official d-link support site).  Its prob the same file but it works this time.
I now have a 5TB Toshiba HDD installed - MD04ACA500.
2nd drive is Hitachi 2TB - HDS723020BLA642
And a USB share - ANother 2TB drive.

All working well, however a few issues noticed;
USB Backups.  No matter how I set this up it does not back anything up.  NAS>USB nor USB>NAS.
Haven't seen the network connection as being any faster at all.
Same speed wired or wireless - About 5M/s

Any hints/tips appreciated.

[Linhares]

You installed v2.05b08 twice and it get working fine?
Maybe could be a profile/configuration problem.

Btw, this device is stuck in v2.05b08 right?
No news?