D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-890L => Topic started by: mrkennethtong on February 14, 2015, 06:36:32 AM
-
Upgraded the Firmware to 1.02 for no apparent reason, router can't hold a connection now - fortunately I have two 890Ls so I swapped the old 1.00 Router back on and it's fine but DO NOT UPGRADE TO 1.02!
-
Interesting. It must be coming from their server, don't see it on their support page
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR)
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your router? Look at sticker under the router case.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
- Are you wired or wireless connected to the router?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
- Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
- What ISP Modem service link speeds UP and Down do you have?
- Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended. (http://en.wikipedia.org/wiki/CAT6)
- Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values (http://forums.dlink.com/index.php?topic=53008.0)
-
Interesting. It must be coming from their server, don't see it on their support page
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR)
Update via Router and you will see it there.
-
I'll try this and see. ;)
-
Interesting. It must be coming from their server, don't see it on their support page
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR)
Update via Router and you will see it there.
Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond ;D
-
Come on in, waters fine Sir. ;D
Interesting. It must be coming from their server, don't see it on their support page
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR)
Update via Router and you will see it there.
Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond ;D
-
I found this regarding v1.02:
Supports Singapore, Brazil, Latin America, Russia, Australia and Europe Region
Enhancements:
Adopting Russia encryption regulation, QuickVPN will now supports ONLY RC4-40 for Russia devices; no affective for
devices shipped to other region.
For now I'll recommend anyone in the NA region, DO NOT UPGRADE to v1.02 at this time. I'm sure D-Link is aware of issues.
You can go back to older FW. Please follow the FW update process to downgrade if needed.
-
Come on in, waters fine Sir. ;D
Interesting. It must be coming from their server, don't see it on their support page
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR)
Update via Router and you will see it there.
Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond ;D
Lol, your killin me :P
-
What? It's working. LOL ;D
Come on in, waters fine Sir. ;D
Interesting. It must be coming from their server, don't see it on their support page
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR)
Update via Router and you will see it there.
Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond ;D
Lol, your killin me :P
-
http://forums.dlink.com/index.php?topic=62142.0 (http://forums.dlink.com/index.php?topic=62142.0)