Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mrkennethtong]

Upgraded the Firmware to 1.02 for no apparent reason, router can't hold a connection now - fortunately I have two 890Ls so I swapped the old 1.00 Router back on and it's fine but DO NOT UPGRADE TO 1.02!

[Lexist2112]

Interesting. It must be coming from their server, don't see it on their support page

http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?
• Are you wired or wireless connected to the router?
• Has a Factory Reset been performed?
• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

>FW Update Process

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
• What ISP Modem service link speeds UP and Down do you have?
• Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
• Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values

[mrkennethtong]

Interesting. It must be coming from their server, don't see it on their support page

http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR

Update via Router and you will see it there.

[FurryNutz]

I'll try this and see. 

[Lexist2112]

Interesting. It must be coming from their server, don't see it on their support page

http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR

Update via Router and you will see it there.

Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond 

[FurryNutz]

Come on in, waters fine Sir. 

Interesting. It must be coming from their server, don't see it on their support page

http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR

Update via Router and you will see it there.

Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond 

[FurryNutz]

I found this regarding v1.02:
Supports Singapore, Brazil, Latin America, Russia, Australia and Europe Region
Enhancements:
Adopting Russia encryption regulation, QuickVPN will now supports ONLY RC4-40 for Russia devices; no affective for
devices shipped to other region.

For now I'll recommend anyone in the NA region, DO NOT UPGRADE to v1.02 at this time. I'm sure D-Link is aware of issues.

You can go back to older FW. Please follow the FW update process to downgrade if needed.

[Lexist2112]

Come on in, waters fine Sir. 

Interesting. It must be coming from their server, don't see it on their support page

http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR

Update via Router and you will see it there.

Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond 

Lol, your killin me 

[FurryNutz]

What? It's working.  LOL

Come on in, waters fine Sir. 

Interesting. It must be coming from their server, don't see it on their support page

http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2fR

Update via Router and you will see it there.

Yea I figured that much. Just like the Netgear R8000. Within a week Netger posted the FW to thier support page.
Gonna wait for Furry to do more testing before i jump into the pond 

Lol, your killin me 

[FurryNutz]

http://forums.dlink.com/index.php?topic=62142.0